Announcement

Collapse
No announcement yet.

IDX-PRO+VDI

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • IDX-PRO+VDI

    Hello. I found this Russian forum of IDX-PRO PCB. The PCB had many mistakes and failures of some components. I corrected the PCB and added the missing components. I wish that we all take a look and give a chance on this project. Surely here in the forum there are people who would be interested in this project. I've also found the VDI file with all documentation. Please advise if there is any error in the PCB. I'll put here a video of this VDI I found on Youtube. Thanks for reading. Eduardo.
    Attached Files

  • #2
    http://www.youtube.com/watch?v=oSA9y...ature=youtu.be

    Comment


    • #3
      Hello Eduardo
      Thanks for putting this project in the forum, is especially interesting presentation LCD. At first sight (the presentation LCD), it seems that can be adapted to other existing projects.
      I'll see if I get the components in my country.
      regards

      Comment


      • #4
        I'm going to try to adapt VDI TGSL to see if it works.

        Comment


        • #5
          VDI

          Originally posted by eduardo1979 View Post
          I'm going to try to adapt VDI TGSL to see if it works.
          Coolest project!

          Comment


          • #6
            IDX-PRO

            Hello! All right, completely revised. Here I leave the edited file and guaranteed 100%. Shortly I will post the PCB of the VDI. Enjoy everyone.
            Attached Files

            Comment


            • #7
              Excellent job!
              Although R27 could be placed a bit more "happier"!
              I am guessing it was planned to be SMT?

              Comment


              • #8
                Ivconic Thanks!. True, R27 is a bit misplaced, because it had no place to get more clues. SMD R27 may be no problem.

                Comment


                • #9
                  IDX-PRO

                  Attached Files

                  Comment


                  • #10
                    Maybe like this?
                    No need all traces to be 0.8mm.
                    Attached Files

                    Comment


                    • #11
                      Yeees. Tnks

                      Comment


                      • #12
                        VDI-IDX-PRO

                        Attached Files

                        Comment


                        • #13
                          IDX-PRO+VDI FINAL

                          Hello! After many hours of work have brought together all parts of the IDX-PRO. The project is 100% correct, both the metal detector, and the VDI. No errors, everything is checked thoroughly. Tomorrow I will start making the PCB-S. Enjoy the new project. Greetings to all. Eduardo.
                          Attached Files

                          Comment


                          • #14
                            IDX

                            Does anyone have any info on the coil of this? TX inductance, RX inductance, Freq etc. Thanks Eduardo for the great project info.

                            Comment


                            • #15
                              TX wire from 0.70 to 35 laps - 0.587 mH - within 1 mF capacitor
                              RX wire from 0.15 to 270 laps - 35.6 mH - 0033 mF condenser inside

                              Comment

                              Working...
                              X