I m designing pcb at home.

[Qiaozhi]

Sir , i copied top and bottom on butter paper and when i apply that on pcb ,the connection are too much small ,on reaction with feric chloride the tracks become missing ...
So i need layout little bit larger in size thank You

The MPP PCB layout is not suitable for etching using ferric chloride.
You need to send off the Gerber files to a Chinese PCB manufacturer, or redo the layout yourself if you must have a larger board.

Alternatively you could make a layout for stripboard using this nifty program -> http://bancika.github.io/diy-layout-creator/
There are loads of youtube videos available to teach you how to use it.

[qurashimoin]

Sir , i copied top and bottom on butter paper and when i apply that on pcb ,the connection are too much small ,on reaction with feric chloride the tracks become missing ...
So i need layout little bit larger in size thank You

[Qiaozhi]

Can any one please share with me the pcb layout in clear and in large size ,bcz i m desining that at home

Look at the Gerber files using a viewer such as gerbv.
Minipulse Plus REV-D

[qurashimoin]

Can any one please share with me the pcb layout in clear and in large size ,bcz i m desining that at home