Let's made a PC-base metal detector with usb interface !!!

[maca404]

Without looking at the nitty gritty that Ground Exper looks awesome, I had always wondered about graphically interpreting the signal by adding coil position tracking and then plotting singnal intensity. It would not be particularly high resolution but would be usefull to miss big thing like cans etc.

[Aziz]

Mobile phone or tablet PC - based metal detector

DRS GroundExper (TM), the best metal detector of 2013 in Europe with "exclusive" Advanced Digital Pulse Induction Signal Raining Technology (ADPISRT) (TM).
Made in Germany utilizing "exclusive" patented high-technology electronics.

www.drselectronics.de

Hi Mikebg,

I thought you are making a joke!
But this is the "Ultimate End of Greedlab"(c)(r)(tm). This is the THERMO NUCLEAR MELT-DOWN!!!!

BTW, I had my own PC THERMAL MELT-DOWN. *LOL*
Nice find. I like the technology.
Cheers,
Aziz

[mikebg]

Mobile phdne or tablet PC

Mobile phone or tablet PC - based metal detector

DRS GroundExper (TM), the best metal detector of 2013 in Europe with "exclusive" Advanced Digital Pulse Induction Signal Raining Technology (ADPISRT) (TM).
Made in Germany utilizing "exclusive" patented high-technology electronics.

www.drselectronics.de

[Davor]

It happens. Therefore I install TThrotle on my computers, see http://efmer.eu/boinc/
It both monitors temperature, and apply temperature throttling tasks (e.g. a task that does nothing for allotted time, therefore cools a processor) so even in serious dust buildup keeps your processor and a GPU under a target temperature. It also makes sense to limit the temperature at which a computer switches off in Bios - if you have one.

Don't go for green disks, they are hoax, and they are slow.

If possible go for the PSU with the largest and the slowest fan possible. Those are more quiet too, and pick less dust on their blades.

I myself am lurking the PC market lately. There are a few items difficult to come by, say a good passive cooled GPU.

[Aziz]

Oh yeah!, I have checked my ATX power supply module. It went up in smoke and I have seen some parts being totally damaged and burnt.
I hope I can repair my PC with a brand new power supply module. Well, if other things didn't get screwed of course.

Cheers,
Aziz

PS: Don't forget to clean your power supply module from time to time. Mine wasn't for a decade or longer.

[maca404]

Its ok I already know the answer its 42

[6666]

Aziz its the start of the THERMONUCLEAR war somebody spiked your power line , they are on to you

[Paul99]

I'll be online now and then...

Cheers,
Aziz

Hell, thank God for that! I was thinking there for a minute that I'd have to fall back to trying to stir up Davor if you were to disappear!!

[Aziz]

Very nice. It's soooo silent now with my Netbook (hello!, anybody out there?). I should buy a green PC with low power consumption this time.

BTW, my ATX power supply section has melted down with smoke generation during watching a movie. I have opened the part and it was full of black dust. Cleaned and connected back: dead. I hope, that the (SATA) hard disks weren't affected.

Backups? What's that? *LOL*
I'll be online now and then but all the projects will be delayed.

Cheers,
Aziz

[Qiaozhi]

Hi all,

I had an "ultimate PC melt-down"(c)(r)(tm) with heavy smoke generation. My PC is totally kaput and it will take some time to get a new PC. I am posting this from my Netbook.
Let the AEGPF know it please.
Cheers,
Aziz
PS: Damn it! I was very close to calculate the mother of all questions. Another 10 million years to go...

Hopefully you've not just learnt the importance of backups.

[WM6]

Aziz, I hope to your PC full recovery soon.

Your message is forwarded to AEGPF.

[Aziz]

Screwed My PC!!!

Hi all,

I had an "ultimate PC melt-down"(c)(r)(tm) with heavy smoke generation. My PC is totally kaput and it will take some time to get a new PC. I am posting this from my Netbook.
Let the AEGPF know it please.
Cheers,
Aziz
PS: Damn it! I was very close to calculate the mother of all questions. Another 10 million years to go...

[Aziz]

4212

Oh well,

regarding the simulation of all and everything and particularly metal detecting:
Someone made a mistake in the simulation software and it only gives the two digits of the answer: 42

http://www.youtube.com/watch?v=aboZctrHfK8

That's the wrong answer actually. It must be 4212. *LOL*
My software simulation didn't take 7 million years, it took only 7 years.
-----------------------------------------------
The "total metal detecting thermo-nuclear melt-down"(c)(r)(tm) is coming..

Cheers,
4212 *LOL*

PS: Thanks everybody for wishing me the best.

[Aziz]

Hi all,

nice reactions. *LOL*

But the majik choke doesn't require a gap. And there isn't any magnetic saturation issue as you can use appropriate cores for high power applications (iron powder, larger ring cores).

And what's the function of the majik choke?
It is a frequency dependent "switch".

Cheers,
4212

[PATCHES JUNIOR]

Paul, you write crap because you have not sobered up from New Year's Eve.
Nothing is simulated! Do not you see that there is a real working model? It will become THERMONUCLEAR SMELTER in the 2014 with new TX.
Please do not rename the Majik Choke into the Majik Smoke. In the attached here photo, an arrow shows the Majik Choke. From it is seen that the magnetic core has no air-gap. The discoverer of Majik Choke not knows that when in a choke flows large DC component, the core should have an air-gap, bu he will google for “air gap choke” and will read this:
http://powerelectronics.com/content/why-have-air-gap

That is good news. How long has it been out in the bush testing it? Can hardly bloody wait for the test results. This year?