Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

gpr project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • anto22
    replied
    nasa development has great designs and very good resolution.
    but in wet soil is not allowed to penetrate and 10 cm.
    Concrete and sand is great.

    Leave a comment:


  • Götz von Berlichingen
    replied
    Originally posted by anto22 View Post
    Hello.
    very good question.
    I dont have of 1ghz adc. I have developed a sample&hold scheme that contains radar itself, it slows down time very fast processes and displays them slowly so they can be visualized by slow adc.
    This is actually a radar.
    Thank you, now i can understand how its done.
    Seems like it works like the NASA CRUX GPR - a smart Design.
    Attached Files

    Leave a comment:


  • unknowing
    replied
    Can anybody explain why 8nS pulse in white ellipse is triangular ?

    Thanks!

    Leave a comment:


  • anto22
    replied
    Hello.
    very good question.
    I dont have of 1ghz adc. I have developed a sample&hold scheme that contains radar itself, it slows down time very fast processes and displays them slowly so they can be visualized by slow adc.
    This is actually a radar.

    Leave a comment:


  • Götz von Berlichingen
    replied
    Originally posted by anto22 View Post
    have developed two software for this project, one works in sound card, in other com port with adc 8 bit.
    Sampling the GPR rx (received) Signal with a Sound Card or through the Com Port (without extra Logic like a FPGA) is just plain impossible.
    Your Screenshots look like a 1GHz ADC is running (around 1ns for a Sample).
    A Soundcard would need 23us... useless for GPR.

    Leave a comment:


  • Krzysztof
    replied
    Hi Anto22.
    Give a little more technical data and some ideii.
    Maybe it is an interesting approach can be applied anywhere else?
    You have an interesting cut noise. Good filters in DS card?
    It may be developmental ideas.
    Congratulations.
    Best regards Chris.

    Leave a comment:


  • unknowing
    replied
    Originally posted by anto22 View Post
    have developed two software for this project, one works in sound card, in other com port with adc 8 bit.
    Two software is OK, but why delete it ?

    Leave a comment:


  • anto22
    replied
    have developed two software for this project, one works in sound card, in other com port with adc 8 bit.

    Leave a comment:


  • Götz von Berlichingen
    replied
    A GPR with a 44100Hz Sampling Rate ?
    Something is wrong here.
    I would like to know what kind of ADC is used here,
    because the Soundcard wont cut it in the Nanoseconds Range of a GPR.

    Leave a comment:


  • unknowing
    replied
    before








    now







    why ?

    Leave a comment:


  • mikebg
    replied
    Yes, I agree! Unknowing, you are Knowing!

    Leave a comment:


  • unknowing
    replied



    Leave a comment:


  • mikebg
    replied
    Unknowing, you don't know how to rotate image.
    Attached Files

    Leave a comment:


  • unknowing
    replied


    Leave a comment:


  • mikebg
    replied
    Originally posted by unknowing View Post
    Are these the same generators ?
    Uploaded with ImageShack.us
    Unknowing, the black box in the right is not generator, it is receiver
    For more information see
    http://www.pulsediscriminator.net/index.html
    Enjoy!

    Leave a comment:

Working...
X