chance pi build

[baum7154]

yes I'm sure that will be possible

-----------------------------------------

That is great Andy.

Thanks,

Dan

[WM6]

Please announce when kit will be available, thanks.

[silverdog]

yes I'm sure that will be possible

[baum7154]

Ok, i have had several inquiries about CHANCE recently - strange as nothing in almost 2 years , however I will get a batch of pcbs made - should be here within 10 days
Good luck all - not sure if i'll do a full kit yet

------------------------------------

Thanks Andy! Will you be able to provide the Atmega chip programmed with the V1.2.1 firmware as in the past? That is the last version available and is the one you had programmed before. This will help greatly those not having the capability to do it and has been a stumbling block for many.

Regards,

Dan

[silverdog]

Ok, i have had several inquiries about CHANCE recently - strange as nothing in almost 2 years , however I will get a batch of pcbs made - should be here within 10 days
Good luck all - not sure if i'll do a full kit yet

[kellogs]

Hi chet great to hear from you thank you for your in put on my new project am excited and thank you for your advice on help if required you are all a great lot of people as i sad to baum 7154 when i start the build i will keep you posted all so looking at buying a Hitachi v-212 oscilloscope has all the leads etc thanks again mate talk later Kindest Regards kellogs

[Chet]

Hi Kellogs

I think the Mirage is a fine choice. You already know you can get help here if you have problems.

Have a good day,
Chet

[kellogs]

Hi Dan hope it is ok to call you Dan great to hear back from you as well the kit comes with a 7'' coil all ready wound so when i have every thing done i will try the round and oval coils the basket weve you have helped every one with i just have to make up the latest coil you have been testing i will keep you posted and send pics have a great day mate Kindest Regards kellogs

[baum7154]

Good to have you back Kellogs! I don't know much about the Mirage detector but it seems that it has some happy users. Good luck with your build of it. Have you decided what coil you will use with it? Great coils are at least half of the challenge!

Cheers,

Dan

[kellogs]

Hi baum7154 and chet how have you been busy i see going by your posts i have been looking around for another detector to build now i am getting a little bit more of a understanding of things i have ordered a mirage i kit so am waiting on it a bit excited i hope it is a ok as it has had some good reviews one can only try any way let me know what you think catch up later Kindest Regards kellogs

[sinclairuser]

george, can we do a poll post to find out how many would like to buy a chance kit?.
andy might be persuaded to do a run if enough are interested, the only way to know really would be a poll.
maybe someone else could do a board run, or even kits untill we have some numbers we wont know how viable it is.

[Alan Honolulu]

Thanks Dan, hopefully kits become available in near futire. Will be sure to look at modifications you made also for improved performance.

R/Alan.

[baum7154]

I was looking to find a chance pi kit, silverdog in uk says he dont have any, anyone know of anyone that might also sell these

Or can point me in the direction, certainly would like to obtain one

Thanks for your help

R/Alan

---------------------------------
Alan, you are one of many in the past year who have been interested in getting the CHANCE PI kit from Silverdog. Last September I made a request for more kits from Silverdog but I think he was fully occupied with the MINIPULSE kits at that time. Qioazhi also made a request at that time but we have not had a response yet. Perhaps he now has time to compile more kits. I will say that the 2 kits I received from Silverdog a few years ago were very good in quality. If you read through this thread I have detailed the modifications I made to the original kits to get CHANCE PI to it's current performance.

Regards,

Dan

[Alan Honolulu]

I was looking to find a chance pi kit, silverdog in uk says he dont have any, anyone know of anyone that might also sell these

Or can point me in the direction, certainly would like to obtain one

Thanks for your help

R/Alan

[baum7154]

Good luck with your tests! I have never built a 4" spidercoil but expect it would be about the right size for your testing. Do you intend to take this into the field or just test it on the bench? For small gold CHANCE original preamp adds too much delay about 10us due to saturation and that masks the response from small gold in the range of 5 grains or .3 gram. To correct this the 2 stage amp is required.

Regards,

Dan