Bulgarian 'PULSE STAR' (... close to Legendary one)

[mohandes]

hello george
what is my wrong?i can not find it.help me.i use 7909 instead 7910.
thanks

[Geo]

Georgi,
Attention, the designer of genuine PULS STAR is here in the forum.

http://www.geotech1.com/forums/showthread.php?20038-Triangular-Wave-Technology&p=164732#post164732

Трябва да знаеш това защото има опасност да кажеш и на него:
"The scheme is very complicated for you !"
http://www.tb-electronic.de/start/index2.html

Hi Mike.
Who is the designer of original PS???
Do you know him or you readed it.

Regards

[mohandes]

hello
Lyt fail ....NOT FAIL!?????????? what s your mean?your mean my design pcb correct?
my trannsistor are soon hot when i connect the source?
help

[georgi.g.zhelev]

Hello
I make the all pcb & last night set the part list of http://ups.night-skin.com/up-91-10/need4.jpg but have problem.
put the pcb shematic and picture for your help to me.

http://p30up.ir/up/6dw43o04pnghnrgmhph.zip

regards.

Hello
1.I make the all pcb & last night set the part list of http://ups.night-skin.com/up-91-10/need4.jpg but have problem. 12pcs x 1.2 v
2.http://p30up.ir/up/6dw43o04pnghnrgmhph.zip.....Lyt fail ....NOT FAIL!

[mohandes]

Hello
I make the all pcb & last night set the part list of http://ups.night-skin.com/up-91-10/need4.jpg but have problem.
put the pcb shematic and picture for your help to me.

http://p30up.ir/up/6dw43o04pnghnrgmhph.zip

regards.

[mohandes]

Hi georgi
I make the all pcb & tonight set the part list of http://ups.night-skin.com/up-91-10/need4.jpg

but i have not voltage +8 -7 -10.6 -10 -12.
but since i have not 12*1.2v i use the Adapter 15v and 1000Ua.
help me i put the picture tomorrow
regards

[mikebg]

STOP!!!! This scheme is not for you ! The scheme is very complicated for you !Your training is very low, sorry.

Georgi,
Attention, the designer of genuine PULS STAR is here in the forum.

http://www.geotech1.com/forums/showthread.php?20038-Triangular-Wave-Technology&p=164732#post164732

Трябва да знаеш това защото има опасност да кажеш и на него:
"The scheme is very complicated for you !"

http://www.tb-electronic.de/start/index2.html

[satdaveuk]

Your gifted with lots of patients Georgi, something I lack these days

[mohandes]

hello dear george
tonight i finish the design pcb.
tomorrow i will make that.
the best for you.
regards

[Geo]

ОК Geo G.L.!

George, sorry for late answer.
Thanks for your help.

i wish you all the best

[mohandes]

no this is not my mean.my means that in the a one Rainy Day have a Similar performance too Ordinary Day,and are you get the real test of that?
sorry me.
regards

[georgi.g.zhelev]

STOP!!!! This scheme is not for you ! The scheme is very complicated for you !Your training is very low, sorry.

[mohandes]

thanks george
but in ALEXSIS schematic have 2 UAmperemeter that 50uamp.
what is the different beetween ALEXSIS and you.?whichi is better?
are you find the gold or something else with the ps g detector in wilderness and Ancient sites. is the discriminator have good job?
regards

[georgi.g.zhelev]

SEE FRONT PANEL " PULS STAR-G" . TUNE> potenc.; DELAY> potenc. ; VOLUME>potenc. R11>potenc.http://

[mohandes]

HEllo dear george.
a little time Takes to make ALEXSIS pcb.maybe after week it is ready but in shematic some where is Unknown.

http://uploadtak.com/images/5647_.jpg

you say all of the cap are polyester.can i use WIMA capacitor Instead all polyester capacitor.
I see 8 multi turn in the pcb of ALEXSIS http://www.geotech1.com/forums/showt...ary-one)/page8 #182 and http://www.geotech1.com/forums/showt...ary-one)/page6 #147. please help in shematic no Specified VOLUME and multi turn potenciometer.
and a question that not related to this thread but i shoude to ask you?do you have a information about cscope metadec1.?
regards