Aquapulse

[dbanner]

[ATTACH]49936[/ATTACH]

I bought a older model Aquapulse at an auction, opened it up and seen its no longer usable (burnt rails, dry soldering / corrosion), designed the PCB based on what i have, sent off to have the board printed, just finished ordering all the components, hopefully have it built in the next two or three weeks and the ill have to dial it in.

[ATTACH]49936[/ATTACH]

Jason nz, I assume you don't have a schematic, and you intend to assemble the PCB by just relying on the original PCB and wiring?
Would be nice to have a schematic to go along with the project.
I have traced out part of the schematic, maybe I'll try to complete the whole thing. It would help if you could post a sketch of the wiring from the PCB to the front panel or maybe some photos.

[kt315]

I can now login to findall, but that link doesnt seem to work any more, I dont know what they have been playing at findall but they have made a mess of it.

6x4, yes, findmall onetime, too recently, had changed a server placement and outer form, but login was not been deleted (for me).
so all old links on it now are not valid.

this thread https://www.findmall.com/threads/any...-board.290275/

[jasonNZ]

Possibly have a few spare boards for whomever whats to contribute to this project, looking at getting alternative components for this board because most are now obsolete, looking for someone that can do a technical writeup of the build process / testing and tuning, or someone that can do the proper schematics drawing ?

If you want to contribute just drop me a message and ill get what i have off to you.

I can now login to findall, but that link doesnt seem to work any more, I dont know what they have been playing at findall but they have made a mess of it.

Archive site -> https://archive.findmall.com/read.ph...119199,2119199

[6666]

open new thread because yet nothing about AP was been shared.
some pics and Qs http://www.findmall.com/read.php?22,...99#msg-2119199
what you are able to help with pics, sketches, maybe diagram.
all your information might be used for new Project. anotherway there will be no perspective.

Anatloy

I can now login to findall, but that link doesnt seem to work any more, I dont know what they have been playing at findall but they have made a mess of it.

[jasonNZ]

They look nice, got any spare ?, this is a joke but just connect a battery you will soon find shorts

i see some progress snail moving in right direction... Nelson is out, no help, no friendship, no goodwill.
JNZ, can you share pics in HR (5... 12 mb) of both sides of original board? please washed by alcohol and at sunny day under the sun.
my email [email protected]

TIA amigo

Possibly have a few spare boards for whomever whats to contribute to this project, looking at getting alternative components for this board because most are now obsolete, looking for someone that can do a technical writeup of the build process / testing and tuning, or someone that can do the proper schematics drawing ?

If you want to contribute just drop me a message and ill get what i have off to you.

[kt315]

i see some progress snail moving in right direction... Nelson is out, no help, no friendship, no goodwill.
JNZ, can you share pics in HR (5... 12 mb) of both sides of original board? please washed by alcohol and at sunny day under the sun.
my email [email protected]

TIA amigo

[6666]

My boards just arrived, still waiting for half of the components to be delivered

Will be checking over the boards to see if there are any shorts.

[ATTACH]49995[/ATTACH]

[ATTACH]49996[/ATTACH]

[ATTACH]49997[/ATTACH]

They look nice, got any spare ?, this is a joke but just connect a battery you will soon find shorts

[jasonNZ]

My boards just arrived, still waiting for half of the components to be delivered

Will be checking over the boards to see if there are any shorts.

[dbanner]

There is a Sprint file of the layout for the Aquapulse AQ1B here on the forum.

[6666]

[ATTACH]49936[/ATTACH]

I bought a older model Aquapulse at an auction, opened it up and seen its no longer usable (burnt rails, dry soldering / corrosion), designed the PCB based on what i have, sent off to have the board printed, just finished ordering all the components, hopefully have it built in the next two or three weeks and the ill have to dial it in.

[ATTACH]49936[/ATTACH]

Very cool, will be watching your progress, I hope it works for you

[surfdetector]

[ATTACH]49936[/ATTACH]

I bought a older model Aquapulse at an auction, opened it up and seen its no longer usable (burnt rails, dry soldering / corrosion), designed the PCB based on what i have, sent off to have the board printed, just finished ordering all the components, hopefully have it built in the next two or three weeks and the ill have to dial it in.

[ATTACH]49936[/ATTACH]

This is really interesting. Hopefully you can document the project here as you progress.
Cheers

[jasonNZ]

Which project did you build ?

I bought a older model Aquapulse at an auction, opened it up and seen its no longer usable (burnt rails, dry soldering / corrosion), designed the PCB based on what i have, sent off to have the board printed, just finished ordering all the components, hopefully have it built in the next two or three weeks and the ill have to dial it in.

[6666]

What model is this ?

I busy waiting on a set of boards i got printed (I think the model A with the single Potentiometer) , sourcing some of the IC's have been tricky to source most of them being if not all being obsolete.

Which project did you build ?

[jasonNZ]

bot side
[ATTACH]38322[/ATTACH]

What model is this ?

I busy waiting on a set of boards i got printed (I think the model A with the single Potentiometer) , sourcing some of the IC's have been tricky to source most of them being if not all being obsolete.

[kt315]

dude looks good https://www.ebay.com/itm/Aquapulse-I...IAAOSwEbBeJzes