Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

White 3900D

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dbanner
    replied
    Originally posted by MartyJ1963 View Post
    Do you have your final layout in Sprint please DB?,,Thanks,,Marty
    .
    Sorry folks, I uploaded the wrong file

    Here is the final sprint layout. I am etching my pcb today. I'll show pics of the outcome, whether good or bad.
    Attached Files

    Leave a comment:


  • dbanner
    replied
    Originally posted by kt315 View Post
    Blue plot is output of LM393.(ltSpice)
    ---
    393 reacts just on knob RESET. in your plot its like a generator. bad.


    The blue plot is the output of U3/1. The reset switch toggles U3/2 output to HIGH/LOW. LM393 is a dual comparator chip.

    I should have made that clear before, so thanks for pointing that out.

    The output of U3/1 is the gating pulse which is supposed the provide a balanced signal to the inputs of the differential amplifier U2/1 of LM324.

    Leave a comment:


  • MartyJ1963
    replied
    Do you have your final layout in Sprint please DB?,,Thanks,,Marty

    Leave a comment:


  • kt315
    replied
    translate a text on sch. on output of the 393:

    in standup logical 1 (H - high level, near +E)
    closed S2 (S2 is knob RESET) gives logical 0 (L - low level, near -E)

    Leave a comment:


  • kt315
    replied
    Blue plot is output of LM393.(ltSpice)
    ---
    393 reacts just on knob RESET. in your plot its like a generator. bad.

    Leave a comment:


  • SWL
    replied
    Board file extension?

    Leave a comment:


  • dbanner
    replied
    Here is my final layout. I intend to go with this one. The circuit is checked as best as I can, and everything looks good according to the original circuit. Any errors will have to be corrected afted construction and testing.
    Attached Files

    Leave a comment:


  • dbanner
    replied
    Blue plot is output of LM393.(ltSpice)
    Red plot is the Tx waveform after VR1. The DC offset of the blue plot is wrong because I use 0 as common whereas the actual circuit is 1.7v.
    It is just to give general idea of what to expect at analog switch... a square pulse.
    Attached Files

    Leave a comment:


  • dbanner
    replied
    I warn everyone who is interested, please do not attempt to build this circuit unless you know what you are doing!
    Otherwise wait until I have tried to make a good working prototype. It is a learning experience for me, and I don't mind being disappointed.

    Leave a comment:


  • dbanner
    replied
    Originally posted by SWL View Post
    Pin2 LM324 not connected [ATTACH]48302[/ATTACH]
    Yes thankyou, I saw couple more little things as well.
    All has been corrected and verified, soon I will put the final version. You have good hawkeyes!

    Leave a comment:

Working...
X