Magnetometer MWB2.

[j570]

English version. Sensor.

[etznab]

Instructions for making a sensor. In Russian.

Error when unzip . Please upload again, maybe anyone russian chars?

thanks

[Geotech11]

What can this be used for?

[Badim33]

Sorry for the long break. War. These are fuse bits in the Avreal programmer. https://real.kyiv.ua/avreal/
According to the description of this Avreal programmer, you can configure the fuse bits in another programmer.

c:\avreal\avreal32-1.29r1 -p1 +mega1284P -%% -o16000 -ab -5 -fJTAGEN=1,EESAVE=0,SUT=2,CKSEL=7,BLEV=1,BOOTRST=0, BLB1=1,BLB0=1,OCDEN=0,BOOTSZ=2,CKDIV8=1 -v -w
pause

Could you share the source code?

[Badim33]

c:\avreal\avreal32-1.29r1 -p1 +mega1284P -%% -o16000 -ab -5 -fJTAGEN=1,EESAVE=0,SUT=2,CKSEL=7,BLEV=1,BOOTRST=0, BLB1=1,BLB0=1,OCDEN=0,BOOTSZ=2,CKDIV8=1 -v -w
pause How to display them in a modern program

[Badim33]

Can you post a block diagram ?

Good afternoon, it was possible to launch

[j570]

If you open a lay6 file in the Sprint Layout program, then when you hover over an element, the name of that element will appear.

Thank You Fisher. I instaled Demo version Sprint Layout and now I see description .

[Badim49]

I don't know. I've never worked with PonyProg. I need to figure it out.

I'm looking forward to it thank you

[Fisher]

suitable for this

I don't know. I've never worked with PonyProg. I need to figure it out. Figure it out yourself. I have other things to do right now.

[Fisher]

Gerber files does not contain element descriptions or outlines. The lay6 file contains element outlines, but it's unclear which element it is, for example, R5 or R8. There are no letter symbols. Do you have a drawing or file that would solve this problem?

If you open a lay6 file in the Sprint Layout program, then when you hover over an element, the name of that element will appear.

[Badim49]

Sorry for the long break. War. These are fuse bits in the Avreal programmer. https://real.kyiv.ua/avreal/
According to the description of this Avreal programmer, you can configure the fuse bits in another programmer.

c:\avreal\avreal32-1.29r1 -p1 +mega1284P -%% -o16000 -ab -5 -fJTAGEN=1,EESAVE=0,SUT=2,CKSEL=7,BLEV=1,BOOTRST=0, BLB1=1,BLB0=1,OCDEN=0,BOOTSZ=2,CKDIV8=1 -v -w
pause

suitable for this

[Fisher]

Sorry for the long break. War. These are fuse bits in the Avreal programmer. https://real.kyiv.ua/avreal/
According to the description of this Avreal programmer, you can configure the fuse bits in another programmer.

c:\avreal\avreal32-1.29r1 -p1 +mega1284P -%% -o16000 -ab -5 -fJTAGEN=1,EESAVE=0,SUT=2,CKSEL=7,BLEV=1,BOOTRST=0, BLB1=1,BLB0=1,OCDEN=0,BOOTSZ=2,CKDIV8=1 -v -w
pause

[Badim49]

This is a very interesting project. Most likely there will be no firmware file (hex)?

do you have Fuses?

[j570]

Interesting link about magnetometer fluid.
https://www.geometrics.com/community...-magnetometer/

[ivconic]

https://www.aliexpress.com/item/1005...apt=4itemAdapt