Magnetometer MWB2.

[Fisher]

Hello. Very interesting project. Could you please publish the Gerber files and the parts list?

List of parts.

[j570]

Thank you very much. Could you describe your experience with this magnetometer? What are the typical detection ranges? For example, a shovel, a car?

[Fisher]

Hello. Very interesting project. Could you please publish the Gerber files and the parts list?

Gerber files. The list of parts will be published later.

[j570]

Hello. Very interesting project. Could you please publish the Gerber files and the parts list?

[Fisher]

And what are the requirements for the cable? What is its optimal design?

I'm using a regular microphone cable. The polarization current is about 1A. Two conductors in the shield.

[JoyJo]

And what are the requirements for the cable? What is its optimal design?

[Fisher]

Instructions for making a sensor. In Russian.

[Fisher]

Sensor.

[Fisher]

More photos

[JoyJo]

I've seen enough magnetometer projects, but I haven't seen a detailed description of the manufacture of a search sensor. Could you describe the manufacturing technology of the search sensor?

[Fisher]

Thank you. Do you have any information about the sensors?

I will provide information for making the sensor

[Fisher]

Very interesting project.What do you use it for?

I use a magnetometer to search for armored vehicles. A magnetometer can be used to search for any ferromagnetic objects. Magnetometers have a much greater detection depth than a metal detector. The magnetometer detects fired ceramics, bricks, and pottery kilns. Unfortunately, the magnetometer does not detect objects made of non-ferrous metals.

[Fisher]

Can you post a block diagram ?

I will draw a block diagram and provide it

[Fisher]

This is a very interesting project. Most likely there will be no firmware file (hex)?

Firmware file in post 6.

[profesor]

Thank you. Do you have any information about the sensors?