Announcement

Collapse
No announcement yet.

Fisher 1266 PART 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Melbeta
    replied
    KT315, you are okay in my book....

    Originally posted by kt315 View Post
    people, again I must to repeat for you one thing.

    I am not interested in F1266-1270 schematics. either Fisher or Tesoro. my interests are only GT-Elite and XLT schematics. if you have a broken board email me and I hope we could be fix up to do reverse engineering together, for learning, not for another aims. please do not ask me send you 1270 or similar schematics. you have an access in this forum and you must be able find any schematic here. I am also ABSOLIUTELY not interested in Nexus schematic. it is not a sphera of mine interests.

    regards
    Anatolij Anatol'evich K.
    KT315,
    In my book, you are okay, go with the flow, and forget those who try to provoke you to anger. Remember, "sticks and stones, may break my bones, but words will never hurt me"! Keep that as your creed.

    You do good here, and you belong here, and just ignor any bad comments. And everyone has to make a living, everyone is "here for a purpose", and remember, "no one is perfect", not even those who open their mouths to speak bad about you. Those who "engage their mouth", should first, "engage their brain". Only those who are perfect, may cast stones!
    Melbeta

    Leave a comment:


  • kt315
    replied
    people, again I must to repeat for you one thing.

    I am not interested in F1266-1270 schematics. either Fisher or Tesoro. my interests are only GT-Elite and XLT schematics. if you have a broken board email me and I hope we could be fix up to do reverse engineering together, for learning, not for another aims. please do not ask me send you 1270 or similar schematics. you have an access in this forum and you must be able find any schematic here. I am also ABSOLIUTELY not interested in Nexus schematic. it is not a sphera of mine interests.

    regards
    Anatolij Anatol'evich K.

    Leave a comment:


  • Unregistered
    Guest replied
    Fisher 1266 PART 2

    It would be nice to see Carl of Geotech remove most of these last few pages of this topic because they are not related to Fisher 1266 . Thank you Carl.

    Leave a comment:


  • roberts
    replied
    KT315, nobody can deny your great (previous) contributions on this forum. You uploaded many schematics here. Good thing! Thanks!
    But from time to time you come here and post many nonsences!? Why?
    Looks like you take to much Vodka from time to time?
    I always fought against "beleivers" here. Never against people like yourself.
    Now we have pretty comic situation; i am arguing with you instead with them? They gonna laugh on us!
    What you dont need is to swear people on national bases, like you done with Bulgarians!? Why? No reason!?
    Whenever i spot some stupid post i have full democratic right (like any member) to react.
    With your recent behavior you lost much of credibillity, trust me.
    Now you need to upload and share 10 good projects more here to retreive some credibillity among us,members.
    Otherwise you are about to be lost like a spring chicken!
    Go for it!

    Leave a comment:


  • kt315
    replied
    Max, you see I did not say ban Andy. I did say share us what you are ready to share out. these men want to kill me in any place of Internet. strange people! if I go in China forum and will write in Chinese they will begin to learn the Chinese too. such people, Max. be cold to this kind of folks. I suggest you to ignore out such men.

    yours trully

    Leave a comment:


  • Max
    replied
    Hi KT315 and AndyF,
    I'm sorry to see your personal war here... I think it's not fair thing to do here.

    I think it's not the right place for personal attacks, apart some humor... maybe

    You can continue by email... if needed.

    No, guys... no need of such stuff... not productive. The scope here is a better understanding of MDs and related stuff... so that posts serve nothing apart boring people or make them angry... like with the bulgarian folks there... no good making such gratuitous attacks! And same apply to offences
    to russians made by unregistered !

    So please stay on topic... or open new threads... but talk about MDs!

    The forum is sacred place... for the entusiast THunters...

    Kind regards,
    Max

    Leave a comment:


  • kt315
    replied
    I agree with you, Mrand. I have offered Andy to get out in Mustafa's thread. this thema is not for a study who is bad who is good. we all must be in the matter of forum because doing the ONE BIG JOB.

    Leave a comment:


  • Mrand
    replied
    Thema is: "Fisher 1266 PART 1". Please back to thema !!! In this site only "Fisher 1266 PART 1" interest me. I think that others too.
    Mrand

    Leave a comment:


  • kt315
    replied
    I think you went in forum to give 'C' code on Clone-PI to Mustafa. that is right? or you went in forum attack myself? so I repeat, people are NOT NEEDING in what you write here about me. share your code, schematics and etc. info and you will be useful. simple rule, Andy.
    now what you wrote is only spammer attack.

    Leave a comment:


  • Andy_F
    replied
    I think, the administration should think of necessity of stay Anatoly Starkov (KT315) among users Geotech. Its behaviour is not adequate. Besides, being the citizen of Lithuania, it makes provocative statements on behalf of Russian people. It is disgusting.

    Leave a comment:


  • kt315
    replied
    f#ck your truth! it is THE LIE what you write. MD4U was done as only AN extension of Geotech for russian people (and maybe for Bulgarians etc.)! we did speedy releases of all Projects that was been viewing on Geotech forum. NOTHING MORE!!! you DID NOT MAKE nothing than Clone-PI, that is CLONE OF ANDREJ SCHEDRIN'S AND JURIJ KOLOKOLOV'S metal detector 'KACSHEJ-PI'!!! you crooked their schematic! you offended their CopyRight!!!

    you are THE PIRATE! what did you say I asked you want you do posting in the forum? your words were - 'I am absoliutely lightly no matter to forum.'

    all forum form is mine idea, BTW. the all net Project MD4U is mine also! ALL!!!

    go out with your f#ng 'truth'! you and Jurij Petrik are PIRATES AND OFFENDERS! Nick Zakrzhevsky will be back (he is on serve in Soviet Army now) and will delete you OUT!

    Leave a comment:


  • Andy_F
    replied
    I think, it is interesting to people to read the truth, instead of legends about pirates. If KT315 have expelled from a forum md4u because it has bored all, it means one - it has bored all, pirates there is nothing.

    Leave a comment:


  • roberts
    replied
    Ha,ha,ha!
    Beer for you!
    F117 was downcasted there already!

    Leave a comment:


  • kt315
    replied
    Originally posted by roberts View Post
    "f#k these bulgarian folks!!!"

    Now!? I am not bulgarian,neither have at least one good friend from there,but this just is not fair,to say something like that!? Some things you just dont do!
    I think Administrators should act fast on this!
    Or, in same manner me and all others can say:

    " F#K KT315, now,tomorrow and always! Anywhere and everywhere! F#K KT315 hard and good!"

    Ha!? How about that?
    KT315 you are champion of posting to many photos of some russian detectors. Yet nobody ever saw any of them!? How come?
    How about showing some real tests?
    Why dont you do something more constructive than just posting plain photos?
    yes, you are Serbian. your real name is Drobodan Drobodanovich. your father, mother, sister and brother were killed at war under F-117 bombing in Belgrad city. we HAD did know that. where is your godwill here? what you do here always? what your real aims here?

    Leave a comment:


  • kt315
    replied
    it is not specificly interesting for all people who I am
    yes, I am waiting effective Bulgarian schematics because I believe Bulgaria people are very productive on md schematics.

    Folks, I would like to ask you now. are you REALLY want Andrej Fiodoroff will share you a code for CLONE-PI because I believe he went with THE goodwill to you? this is your chance now. take it easy.

    sincerely Yours

    Leave a comment:

Working...
X