Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

DISCRIMINATING PI

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tinkerer
    replied
    TINKERER_V1 DISCRIMINATING PI PCB

    Here are the EAGLE files for the Signal processing board of the TINKERERS_V1 DISCRIMINATING PI.

    Tinkerer
    Attached Files

    Leave a comment:


  • Tinkerer
    replied
    DISCRIMINATING IB-PI

    Originally posted by humhum View Post
    Thanks for posting the higher resolution RX

    Tinkerer

    Leave a comment:


  • humhum
    replied
    higher resolution version

    Higher resolution RX

    http://ultrashare.net/hosting/fl/6c4141fe0b/Tinkerer_RX

    Leave a comment:


  • Helikeon
    replied
    Originally posted by Tinkerer View Post
    Hi Helikeon,

    attached are the EAGLE files of the Signal processing circuit in Zip. I hope this works.

    I will upload also the TX files in EAGLE.

    Tinkerer
    Hi Tinkerer,

    Yes. That was successful.

    Thank you.

    Leave a comment:


  • Tinkerer
    replied
    TINKERER_V1 DISCRIMINATING PI TIMING SCHEDULE

    Originally posted by humhum View Post
    Hi TINKERERS, where is .Hex Software for PIC(mcu) and PCB.
    I posted the timing schedule and Hex file at http://www.geotech1.com/forums/showt...0826#post90826

    I am working on the PCB. You are most welcome to design a PCB and post it.
    This is supposed to be a project where everybody contributes.

    Tinkerer

    Leave a comment:


  • humhum
    replied
    Hi TINKERERS, where is .Hex Software for PIC(mcu) and PCB.

    Leave a comment:


  • Tinkerer
    replied
    DISCRIMINATING IB-PI

    Originally posted by Helikeon View Post
    Valid file extensions: bmp doc gif jpe jpeg jpg pdf png psd tif txt zip

    It appears that "rar" files are not allowed.

    Try again with a "zip" file as above.
    Hi Helikeon,

    attached are the EAGLE files of the Signal processing circuit in Zip. I hope this works.

    I will upload also the TX files in EAGLE.

    Tinkerer
    Attached Files

    Leave a comment:


  • Helikeon
    replied
    Originally posted by Tinkerer View Post

    attached are the EAGLE files.

    Hmmm ... that did not work. The .rar file did not want to upload.
    Valid file extensions: bmp doc gif jpe jpeg jpg pdf png psd tif txt zip

    It appears that "rar" files are not allowed.

    Try again with a "zip" file as above.

    Leave a comment:


  • humhum
    replied
    ok , thanks Tinkerer

    Leave a comment:


  • Tinkerer
    replied
    DISCRIMINATING IB-PI

    Originally posted by humhum View Post
    Hi TINKERERS, in to this schematic where is TX coil or Transistor.
    The TX part is here:
    http://www.geotech1.com/forums/showthread.php?t=15683

    There is much more information there, about the coil, power supply etc.

    There are also lots of oscilloscope pictures of the signal, discrimination etc.

    http://www.geotech1.com/forums/forumdisplay.php?f=53

    Tinkerer

    Leave a comment:


  • Tinkerer
    replied
    Discriminating PI

    Originally posted by kt315 View Post
    Tinkerer, new release info on Pulse Devil Nemesis. had you read this?
    PD has the discrimination ability...
    http://members5.boardhost.com/MetalD...253893265.html
    kt315,

    thanks for the feedback.
    Yes, I know about the PULSE DEVIL from David Emery.
    Allan Westersten also has a discriminating PI in the works that should come out soon.

    The TINKERERS_V1 is way behind, but with all of yours help, it can become the
    DISCRIMINATING PI for all the tinkerers of the world to tinker with.

    Tinkerer

    Leave a comment:


  • Tinkerer
    replied
    TINKERER_V1 DISCRIMINATING PI

    Originally posted by hobbes_lives View Post
    Do you have a higher resolution version that you can post?
    Hobbes,
    attached are the EAGLE files.
    This is a work in progress and the help of all of you is very welcome.
    It would be nice if we could kick the EAGLE files around a bit, each one improving things a bit.

    Tinkerer

    Hmmm ... that did not work. The .rar file did not want to upload.
    Attached Files

    Leave a comment:


  • simonbaker
    replied
    Originally posted by Tinkerer View Post
    Here is the discriminating signal processing circuit of the TINKERERS_V1.
    It has been breadboard tested and gives good results.
    The sensitivity is good and the discrimination is to the full depth of detection.
    Any comments, specially on ways to improve are most welcome.

    Tinkerer
    I say congratulations if you made a successful discriminating PI detector! Great job! I hope you make a document of your project and post as file.

    -SB

    Leave a comment:


  • humhum
    replied
    Originally posted by Tinkerer View Post
    Here is the discriminating signal processing circuit of the TINKERERS_V1.
    It has been breadboard tested and gives good results.
    The sensitivity is good and the discrimination is to the full depth of detection.
    Any comments, specially on ways to improve are most welcome.

    Tinkerer
    Hi TINKERERS, in to this schematic where is TX coil or Transistor.

    Leave a comment:


  • kt315
    replied
    Tinkerer, new release info on Pulse Devil Nemesis. had you read this?
    PD has the discrimination ability...
    http://members5.boardhost.com/MetalD...253893265.html

    Leave a comment:

Working...
X