TINKERER_V1 DISCRIMINATING PI PCB
Here are the EAGLE files for the Signal processing board of the TINKERERS_V1 DISCRIMINATING PI.
Tinkerer
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
DISCRIMINATING PI
Collapse
X
-
DISCRIMINATING IB-PI
Thanks for posting the higher resolution RXOriginally posted by humhum View Post
Tinkerer
Leave a comment:
-
higher resolution version
Higher resolution RX
http://ultrashare.net/hosting/fl/6c4141fe0b/Tinkerer_RX
Leave a comment:
-
TINKERER_V1 DISCRIMINATING PI TIMING SCHEDULE
I posted the timing schedule and Hex file at http://www.geotech1.com/forums/showt...0826#post90826Originally posted by humhum View PostHi TINKERERS, where is .Hex Software for PIC(mcu) and PCB.
I am working on the PCB. You are most welcome to design a PCB and post it.
This is supposed to be a project where everybody contributes.
Tinkerer
Leave a comment:
-
DISCRIMINATING IB-PI
Hi Helikeon,Originally posted by Helikeon View PostValid file extensions: bmp doc gif jpe jpeg jpg pdf png psd tif txt zip
It appears that "rar" files are not allowed.
Try again with a "zip" file as above.
attached are the EAGLE files of the Signal processing circuit in Zip. I hope this works.
I will upload also the TX files in EAGLE.
TinkererAttached Files
Leave a comment:
-
Valid file extensions: bmp doc gif jpe jpeg jpg pdf png psd tif txt zipOriginally posted by Tinkerer View Post
attached are the EAGLE files.
Hmmm ... that did not work. The .rar file did not want to upload.
It appears that "rar" files are not allowed.
Try again with a "zip" file as above.
Leave a comment:
-
DISCRIMINATING IB-PI
The TX part is here:Originally posted by humhum View PostHi TINKERERS, in to this schematic where is TX coil or Transistor.
http://www.geotech1.com/forums/showthread.php?t=15683
There is much more information there, about the coil, power supply etc.
There are also lots of oscilloscope pictures of the signal, discrimination etc.
http://www.geotech1.com/forums/forumdisplay.php?f=53
Tinkerer
Leave a comment:
-
Discriminating PI
kt315,Originally posted by kt315 View PostTinkerer, new release info on Pulse Devil Nemesis. had you read this?
PD has the discrimination ability...
http://members5.boardhost.com/MetalD...253893265.html
thanks for the feedback.
Yes, I know about the PULSE DEVIL from David Emery.
Allan Westersten also has a discriminating PI in the works that should come out soon.
The TINKERERS_V1 is way behind, but with all of yours help, it can become the
DISCRIMINATING PI for all the tinkerers of the world to tinker with.
Tinkerer
Leave a comment:
-
TINKERER_V1 DISCRIMINATING PI
Hobbes,Originally posted by hobbes_lives View PostDo you have a higher resolution version that you can post?
attached are the EAGLE files.
This is a work in progress and the help of all of you is very welcome.
It would be nice if we could kick the EAGLE files around a bit, each one improving things a bit.
Tinkerer
Hmmm ... that did not work. The .rar file did not want to upload.
Leave a comment:
-
I say congratulations if you made a successful discriminating PI detector! Great job! I hope you make a document of your project and post as file.Originally posted by Tinkerer View PostHere is the discriminating signal processing circuit of the TINKERERS_V1.
It has been breadboard tested and gives good results.
The sensitivity is good and the discrimination is to the full depth of detection.
Any comments, specially on ways to improve are most welcome.
Tinkerer
-SB
Leave a comment:
-
Hi TINKERERS, in to this schematic where is TX coil or Transistor.Originally posted by Tinkerer View PostHere is the discriminating signal processing circuit of the TINKERERS_V1.
It has been breadboard tested and gives good results.
The sensitivity is good and the discrimination is to the full depth of detection.
Any comments, specially on ways to improve are most welcome.
Tinkerer
Leave a comment:
-
Tinkerer, new release info on Pulse Devil Nemesis. had you read this?
PD has the discrimination ability...
http://members5.boardhost.com/MetalD...253893265.html
Leave a comment:

Leave a comment: