need help first Time

[Anwar2]

You can do this with Easy-PC.
First create your PCB layout. Then select Tools > Reverse Engineer. This will create a schematic, but there will be no connections between the symbols. Next select Tools > Auto Route Nets > All Nets
Job done.

thank u Bos very much Igot this software
thask for all members of nice site Geotech1.com
Anwar2
any kainde help in PCB Making for any one im uderorder

[Qiaozhi]

yes Im design by myself im ver good in proteus and making PCB at Home
you know my Quistion was if got printed board and make screen photo then i make PCB and Iwant to tranfer PCB to circuit design to chack it if it correct or not Iheard there is chines software it call P2S but Icant finde it but got site its demo see
http://www.deltasoft.com.cn/english/index.htm
thanks alot

You can do this with Easy-PC.
First create your PCB layout. Then select Tools > Reverse Engineer. This will create a schematic, but there will be no connections between the symbols. Next select Tools > Auto Route Nets > All Nets
Job done.

[Anwar2]

Are you designing the PCB yourself, or is it an existing design? If it's an existing design, do you have the GERBER files?

yes Im design by myself im ver good in proteus and making PCB at Home
you know my Quistion was if got printed board and make screen photo then i make PCB and Iwant to tranfer PCB to circuit design to chack it if it correct or not Iheard there is chines software it call P2S but Icant finde it but got site its demo see
http://www.deltasoft.com.cn/english/index.htm
thanks alot

[Qiaozhi]

Imean normaly we start with design then we make PCB but I want start PCB then trasfar PCB to Design thanks sss

Are you designing the PCB yourself, or is it an existing design? If it's an existing design, do you have the GERBER files?

[Anwar2]

this is my first time and very thanks
my Question is how or with which program can we transfer PCB lay to circuit Design for recorecton

regards Anwar2

Imean normaly we start with design then we make PCB but I want start PCB then trasfar PCB to Design thanks sss

[Anwar2]

this is my first time and very thanks
my Question is how or with which program can we transfer PCB lay to circuit Design for recorecton
regards Anwar2