My Digital Pulse detector Delta Pulse 3

[Nicolas]

Hello JAP, I did a 1m x 1m coil, the coil can detect, but the detection range shorter than the small coils, I do not know why, I ask the the 1M coil needs much about how many laps is the best effect is the diameter,Do not change the bigger coil the resistance R54, R56 many watts?

Hi

You may describe your small coil please

I see this DP3 is the same DP2 so do not waste your time and your money. it is not a good detector.

Good luck to all

[liudengyuan]

Hello JAP, I did a 1m x 1m coil, the coil can detect, but the detection range shorter than the small coils, I do not know why, I ask the the 1M coil needs much about how many laps is the best effect is the diameter,Do not change the bigger coil the resistance R54, R56 many watts?

[reza vir]

I'm living in Iran
Sanctions can not be purchased due to communication and

[Nicolas]

Hex file to the device is limited.
Does anyone have the correct file?

Hi

You can buy it by contacting Pasha.

[Freelander]

Hey Freelander, I bought one of those 12V 9800MaH batteries (China Made), but it still did not have enough power to run the DP3. I finally found out that you have to find a battery with a minimum of 3 AMPS. Once I did this, my detector worked fine. Hope this helps you !!!

Thank you friend Eaglewings, Here we are sure this MaH indicated value is not real, It's a matter of fraudulence from those unknown suppliers.

[turboaleks]

Programmed Pic microprocessor can be ordered from the Author.

[reza vir]

Hex file to the device is limited.
Does anyone have the correct file?

[eaglewings35]

Nicolas: As reference I received from Pasha 6 meter Cat6 containing 8 wires, but only 6 are connected in order to get 3.6 ohm. (3.6= total ohm including the low noise cable)

Please Mr Jap give me idea about the appropriate Battery to use.

Good luck all.

Hey Freelander, I bought one of those 12V 9800MaH batteries (China Made), but it still did not have enough power to run the DP3. I finally found out that you have to find a battery with a minimum of 3 AMPS. Once I did this, my detector worked fine. Hope this helps you !!!

[Nicolas]

Nicolas: Off-course the coil is detected but outside.


Lets try with 4 turns, fix an object and make trials.


Once I will found the conform battery I will go ahead outside with my device for trials, then I will give you feedback.

OK thank you I understand for what it's detected the object when I put it in the center of the large 1mx1m frame
I or a neighbor electric fields as my magnifying glass ... see my pictures on previous pages

http://www.teknolojiekibi.com/yeni/index.php?topic=3797.4060

ok I'll try it outside.

[Freelander]

Nicolas: Off-course the coil is detected but outside.


Lets try with 4 turns, fix an object and make trials.


Once I will found the conform battery I will go ahead outside with my device for trials, then I will give you feedback.

[Nicolas]

Nicolas: As reference I received from Pasha 6 meter Cat6 containing 8 wires, but only 6 are connected in order to get 3.6 ohm. (3.6= total ohm including the low noise cable)

Please Mr Jap give me idea about the appropriate Battery to use.

Good luck all.

Thank you Freelander

But how the diameter of the coil 6 meter ?

and see if DP3 now detect the coil and metal ......

[pigeon]

Nicolas: As reference I received from Pasha 6 meter Cat6 containing 8 wires, but only 6 are connected in order to get 3.6 ohm. (3.6= total ohm including the low noise cable)

Please Mr Jap give me idea about the appropriate Battery to use.

Good luck all.

hi FREELANDER

THANK YOU VERY MUCH

BEST TIME

[Freelander]

Nicolas: As reference I received from Pasha 6 meter Cat6 containing 8 wires, but only 6 are connected in order to get 3.6 ohm. (3.6= total ohm including the low noise cable)

Please Mr Jap give me idea about the appropriate Battery to use.

Good luck all.

[Nicolas]

Hi liudengyuan
-Delta pulse is Delta pulse , there is no change,Change in the way Display,And pressed keys,List items.And reduction of components,
With a gain increased sensitivity.
-u Problem bad coil,bad op amp ic!!!!
-Select the type of cable good to make coil.
-test lf357[Select GOOD ],TL062
-The HEX is good,for test.
best time
j.

Hi Jap

Why not answer for me

what the best coil for DP3

wire or cable , rounds ,Ohm, mH

and why solution for the DP3 detect my coil

and see your mail Box you have message

Cordially brother

Nicolas

[rajesh]

simple check pulse width reduce resister recheck remoove pot then check proper resistenc ok or conect multi meter ampier 170ma / 80ma