SNIFFER XR-71

[erolunall]

You can learn Türkish but There are no info about LCD connection.
You can buy DP with lcd about 400 dolar from this site.

Best Wİshes
Erol

help for build lcd

hi
dear erolunall
thank you for guide
already i saw this site but i dont know turkish.
i want pcb lcd and components list.
there is only picture is not help for build.
thank again.

thank for help

Hi
dear geo
thank you very much for help.
by

[erolunall]

http://www.teknolojiekibi.com/yeni/index.php?topic=325.0

LCD DELTA PULSE

[Geo]

Hi all
anybody can build lcd for delta pulse or xr71 instead speaker or dc meter please say here.
the detector clone has lcd .can i build similar it for use on delta or xr71.
if anybody information know please guide me.
Regards

Hi. I saw at a Turkey forum a Delta Pulse with LCD. Try to search at turkey language.

[Geo]

Hi
dear geo
CAN U wirte "ALMOST" wire (awg) 1*1 =? 2*2 =? 3*3 =?
and turn 1*1 =? turn 2*2 =? 3*3= ?
whitout substitute resistor.
I apologize for take time you dear geo.
thanks alot.


the lifetime is very little but use of experience other is very beneficial.

Hi 786. You must use 1mm wire (at least) with 2.2Ohm resistor in series
The original coil is 110cm * 110cm and have 16 turns. So at the 2*2 you need 8 turns.
Bye

build lcd for delta pulse

Hi all
anybody can build lcd for delta pulse or xr71 instead speaker or dc meter please say here.
the detector clone has lcd .can i build similar it for use on delta or xr71.
if anybody information know please guide me.
Regards

What wire (awg) and turn

Hi
dear geo
CAN U wirte "ALMOST" wire (awg) 1*1 =? 2*2 =? 3*3 =?
and turn 1*1 =? turn 2*2 =? 3*3= ?
whitout substitute resistor.
I apologize for take time you dear geo.
thanks alot.


the lifetime is very little but use of experience other is very beneficial.

[Geo]

Ohhh where are the other that i wrote ?????


I dont know why dont see the text that i paste here.....
Mixron gives for Delta Pulse with coil 1x1m depth....
130cm for plate 10x10cm
180 25x25cm
260cm 50x50
350cm 1x1 m
With coil 2x2 or 3x1 or 3x3 you can increase the depth from 20...50%
And if you increase the voltage at Mosfet from 12V to 24V then......
or Boooom
Regards

[Geo]

Hi
i think that aban have good pcbs probably 5 meter or +5 deep.
i want see that this is thought is right or false.
maybe Aban reply my mail.
i think to deep + power then sensitivity =speedy $
by.

Hi 786.
5m depth is possible for a large object if you will use a coil 2x2m or 3x3m .
Also the power suply at the mosfet must be 24V.
look what Mikron writes for normal Delta Pulse
“Делта Пулс”е комплектован<SPAN lang=BG style="FONT-FAMILY: Arial; mso-ansi-language: BG; mso-bidi-font-family: 'Times New Roman'">с търсеща рамка 1 х 1м. Дълбочините на откриване са:

dear geo

Hi
i think that aban have good pcbs probably 5 meter or +5 deep.
i want see that this is thought is right or false.
maybe Aban reply my mail.
i think to deep + power then sensitivity =speedy $
by.

[Geo]

Why so interesting about XR71p???? It is another pcb.
XR71 and DeltaPulse are exactly the same detectors (only difference is a trensistor pnp to npn and the value of 2 resistors).
Construct the Delta Pulse, there are all about delta pulse here.
Or you can construct Carl's Hammerhead...... or ATiny.......
If you want to find coins then Delta is not the perfect detector.... try Hammerhead.
Regards

aban not bad head to head togethr !!! MY NAME 786

hi all special who that for teach help.
aban your name is for month iranian.
where are you?
i have to have a protel99 file xr-71p please if you can't send us then let for send it here the authorisation of geo who can it to us.
assist not bad job.
i dont know write english very well.excuse me
good luck.

[1843]

Hi Aft and Geo,

I didn't see anything from Aban. But he claimed that he has modified his circuit and can reach to 5m depth under the soil with it.

Regards!

[Geo]

Hi everybody,

What is the difference between the XR-71p and the Aban's schematic?
Are they absolute the same?

Regards.

Hi 1843
Aban did n't send schematic.
He sent a Protell 99SE file with the pcb lay for the XR71p.