Announcement

Collapse
No announcement yet.

AH SUPER PRO V

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Qiaozhi
    replied
    Originally posted by conan View Post
    Hello do you still have the schematic for the Super Pro V
    I have recently been given one to look at.But the coil is in pieces
    and no way of knowing what to replace with.Powers up and sensitivity is adjustable and meter works,but with out a coil is not much good.
    The coil seems to have a 10n capacitor but coil winding is only a guess
    since the previous hands butchered the tiny wiring.Any suggestions on how to make up something or replacement from another maker like old whites,Garrett,Bounty Hunter to use their coils
    Cheers to all
    Sorry for the delay ... I had to search for the paper copy.
    Attached Files

    Leave a comment:


  • conan
    replied
    Super Pro V Schematic

    Originally posted by Qiaozhi View Post
    Success! Allen has sent me the schematic.
    Now I need to find some time to repair this detector.
    Hello do you still have the schematic for the Super Pro V
    I have recently been given one to look at.But the coil is in pieces
    and no way of knowing what to replace with.Powers up and sensitivity is adjustable and meter works,but with out a coil is not much good.
    The coil seems to have a 10n capacitor but coil winding is only a guess
    since the previous hands butchered the tiny wiring.Any suggestions on how to make up something or replacement from another maker like old whites,Garrett,Bounty Hunter to use their coils
    Cheers to all

    Leave a comment:


  • JimNM
    replied
    That's great!

    Leave a comment:


  • Qiaozhi
    replied
    Success! Allen has sent me the schematic.
    Now I need to find some time to repair this detector.

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by JimNM View Post
    No, I didn't try to get one. You might try contacting Alan Hammetta the builder.
    After some searching I've discovered his email address: [email protected]
    The thing that threw me off course was the misspelling of his first name.
    Anyway, I'll let you know whether I'm successful or not. Thanks for your help.

    Leave a comment:


  • JimNM
    replied
    No, I didn't try to get one.

    No, I didn't try to get one. You might try contacting Alan Hammetta the builder.

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by Joe(TX) View Post
    Feel free to ask me any other questions concerning the SuperPro I'd be glad to answer! Joe
    Do you have the schematic by any chance?

    Leave a comment:


  • JimNM
    replied
    thanks for the reply

    Hi Joe!
    thanks for the reply! If you know any one who wants this one (Super Pro-V), I'd be interesting in trading for something. thanks!
    Jim

    Leave a comment:


  • Joe(TX)
    replied
    SUPERPRO VS. PRO-2

    I also have a Pro-2. It has a tonal control like the SuperPro V. I prefer it over all the other AH Pro detectors. It is a lot more sensitive to nickels than the SuperPro. It is also well balanced and is lighter in weight than the SuperPro. My SuperPro only gets 3 or 4 inches max on a nickel, the Pro-2 gets 6 or 7 inches on the same nickel. These detectors ground tune or can ground-hug the ground very well! No motion here so pinpointing is not a problem. Very loud signals are shallow in depth while the deeper targets are faint. Battery drain seems to be very nominal, I'm still using the same batteries purchased months ago! Objects can also be sized up, that is one can figure out the size of a target without a meter or graph telling one what size it could be! Joe

    Leave a comment:


  • Joe(TX)
    replied
    A.H. SUPERPRO V

    Hi! SEE MY POSTS IN THE VINTAGE-COLLECTABLE FORUM. This a great detector not as deep as the current ones. It seems to be a cross between the BFO and the TR. It can squeal like a BFO but also gives a strong audio signal like the TR. As far as I know the SuperPro V has a tonal control while the SuperPro doesn't! This detector can see thru a lot of the trash and sees the good targets. It is light weight and well balanced and its tonal variances makes it a joy to use. I have found silver in worked out parks maybe because of the small-6 inch loop. It can see around a lot of the trash plus it makes one to slow down to cover each pass thoroughly. Hope this helps. Feel free to ask me any other questions concerning the SuperPro I'd be glad to answer! Joe

    Leave a comment:


  • JimNM
    replied
    It got here!

    I received the AH SUPER PRO-V this afternoon. It's a hipmount/chestmount version with a neck/shoulder strap on the control box. The armrest is on the rod that goes to the coil. It actually works in a strange sort of way. The tuning is weird, but it works in all functions. I'm using a new computer and have a digital camera, but not too good at posting pictures just yet. I'll try to post pics tomorrow.
    Jim

    Leave a comment:


  • JimNM
    replied
    Neat! Thanks for the photos. I should have one in a few days.
    Let you know how it works. Thanks!
    Jim

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by Carl-NC View Post
    Well, actually, the only one I have, happens to be the one Qiaozhi has. So let me know what you want for it.

    - Carl
    Sorry - my mistake. Of course, the other one is an AH Super Pro (without the V). Do you know what the difference is between these two?
    Here's a couple of pics of the AH Super Pro V:
    Attached Files

    Leave a comment:


  • JimNM
    replied
    I have no clue, maybe trade for something?
    Jim

    Leave a comment:


  • Carl-NC
    replied
    Well, actually, the only one I have, happens to be the one Qiaozhi has. So let me know what you want for it.

    - Carl

    Leave a comment:

Working...
X