Announcement

Collapse
No announcement yet.

golden mask from MDETECTORS.COM

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WM6
    replied
    Originally posted by scarface View Post

    -anyway its just a pieces of ****.
    Why do you think so? Do you test it in field?

    Leave a comment:


  • scarface
    replied
    -anyway its just a pieces of ****.

    Leave a comment:


  • mdetectors.com
    replied
    All our clients are happy form service and products.
    In this case was a problem with comunication by emails.
    See new prices for November in

    SEF search coils are included for some of the paks.
    Best regards!

    Leave a comment:


  • Geo
    replied
    Congratulation to MDetectors

    Leave a comment:


  • scarface
    replied
    g.m.2-problem resolved

    -my problem with "mdetectors" is solved now-they send my tubes and a gift (a detector bag)
    -i want to thank you guys becose u leave me to post here my problem.so good luck everybody.

    Leave a comment:


  • Geo
    replied
    Originally posted by getsa View Post
    Hi,Have you any other pictures with better quality?
    Hi.
    I have not something good. I did not use the macro option, so the quality is bad (bad focus).

    Leave a comment:


  • MLR
    replied
    WhyYou want correct something??? I have another photos, yes, but on my Golden Mask there are two back to back sticked loudspeackers-very interesting engineering decision

    Leave a comment:


  • getsa
    replied
    Hi,Have you any other pictures with better quality?

    Leave a comment:


  • Geo
    replied
    Some photos from GM3
    Attached Files

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by kt315 View Post
    scarface, repairing nexus coronado... you see LOW quality here... its handle was been broken at a base...

    good luck
    The stem shown in your picture is not an original Nexus one. Someone must have replaced it at some time with some poor quality parts.

    Leave a comment:


  • Orbit
    replied
    kopiranti dajte semu za ovaj detektor , turbina irf530 irf9530 555 pa pokoi drajver i po neki kondenzator.

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by mdetectors.com View Post
    Hallo Dear Friends,
    We have just received an report for this case and want to inform you that we don't know about this inconvenience.
    We have many-many clients from all over the world every day and we haven't unsatisfied clients, that's why i guarantee that the lower shaft and middle shaft will be send immediately, as we receive the address of the client.
    In addition will be send a present - carry bag for metal detector as compensation.
    We have 3 step control method before sending of the detectors and that's very strange about this mistake.
    If really this happen that problem is in our staff and we are very sorry.
    Best regards to all!
    Originally posted by scarface View Post
    -ok,i think everything takes a bad turns.
    -during times i work with more than 6-10 detectors (fisher 1266,1270/m.explorer 1 and 2/tesoro tejon(my preffered)garret 2500 and ace 250/fisher cz7 a pro/) and i can tell you GOLDEN MASK 2 ITS NOT A BAD DETECTOR,special for this money.my problem was with "MDETECTORS"who forget to send my shafts and coil screw.
    -i dont want to create stupid situation between you guys-i like to think this is a CONSTRUCTIVE forum
    -in picture is what have i done at home with super glue and pipes and shafts from othe detectors
    It seems that mdetectors.com are going to resolve the problem.
    But you might now also need a replacement top shaft.

    Leave a comment:


  • scarface
    replied
    g.m.2

    -ok,i think everything takes a bad turns.
    -during times i work with more than 6-10 detectors (fisher 1266,1270/m.explorer 1 and 2/tesoro tejon(my preffered)garret 2500 and ace 250/fisher cz7 a pro/) and i can tell you GOLDEN MASK 2 ITS NOT A BAD DETECTOR,special for this money.my problem was with "MDETECTORS"who forget to send my shafts and coil screw.
    -i dont want to create stupid situation between you guys-i like to think this is a CONSTRUCTIVE forum
    -in picture is what have i done at home with super glue and pipes and shafts from othe detectors
    Attached Files

    Leave a comment:


  • MLR
    replied
    Originally posted by kt315 View Post
    I give preference to attributes in your picture in comparassion with the video what was on the first page on one of mdetectors sites - maybe more than one month:
    http://www.youtube.com/watch?v=r0T26x6S1XU
    Scarface, the producer of your detector Golden Mask, mister Vlado, is on the TOP line of this video, made from mdetectors!!! on the first so-called metaldetecting meeting in Bulgaria.
    Happy looking!!!

    Leave a comment:


  • MLR
    replied
    WOW, very interesting, thank's

    Leave a comment:

Working...
X