For sale bare boards for Delta Pulse/Sniffer XR-71

[kt315]

I want to get the pcb board.
Do you have a product test videos?

yes, I have product test videos. one, with pin-pointer coil.

[mege59]

I want to get the pcb board.
Do you have a product test videos?

[kt315]

Sabios you are Welcome. and thank you for the warm feedback.
1. Here it is connected to sink .. - montage hole for/of radiator
2. all these serve to this board. - yes, all serve. L=350-450 uH (MICRO-HENRY) will be OK for DP.
3. This detector can be used coils 1 and 2 meters or 1 meter is Maximum - all coils will fit DP, being 1 m, 2 m or 4 m. I also tested DP with micro-, mini-, pinpoint coils (videos were shared in a thread related DP) for a demonstration.


All the best

[sabios]

Delta pulse?

Not to sound ignorant but is it ..
Here it is connected to sink ..

Another question, in this picture are several coils, all these serve to this board.

[sabios]

Sorry

Through this message I give THANKS FOR board Delta Pulse / Sniffer XR-71.
Arrived without problem and had already dimensioned as the quality is amazing.
Now add questions Building a good coil. This detector can be used coils 1 and 2 meters or 1 meter is Maximum.
THANKS kt315

I would appreciate if puden mean like make a good coil for this machine.

Sorry about that ..

[Qiaozhi]

A través de este post os doy las gracias por tablero de Delta Pulso / Sniffer XR-71. llegó sin ningún problema y ya había acotado ya que la calidad es increíble y el tamaño es maravilloso. Ahora una pregunta que sería construir una buena bobina. Este detector se puede utilizar bobinas 1 y 2 metros o 1 metro sólo es el máximo. entender que estas bobinas no son como los de la VLF verdad. y yo no los entiendo bien como el diámetro y el grosor del alambre. [ATTACH] 30349 [/ attach] [attach] 30350 [/ attach]

THANKS kt315

Please read the forum rules -> Basic Rules of the Forums
and make your posts in English.

[sabios]

Delta Pulso / Sniffer XR-71 arrived

A través de este post os doy las gracias por tablero de Delta Pulso / Sniffer XR-71. llegó sin ningún problema y ya había acotado ya que la calidad es increíble y el tamaño es maravilloso. Ahora una pregunta que sería construir una buena bobina. Este detector se puede utilizar bobinas 1 y 2 metros o 1 metro sólo es el máximo. entender que estas bobinas no son como los de la VLF verdad. y yo no los entiendo bien como el diámetro y el grosor del alambre. [ATTACH] 30349 [/ attach] [attach] 30350 [/ attach]


THANKS kt315

[kt315]

thank you Hudson, United States.

[kt315]

welcome... be free to ask ANY request.

What kind of questions using potentiometers to
DEPTH 20k
DISC. 50k
GEB 500k
SENS. 20k
T / HOLD 10k

do you mean those logariphmic or linear? or what?... use linear. standart 5-5,08mm step between pins (or 2,5-2,54mm).


or may be any type of potentiometer only respecting the value.

respecting to THE INTERVAL BETWEEN POT'S PINS - 2,5-2,54mm or 5-5,08mm.

-------------------------------------------------- --------------------
P.P.S. 100k

and this P.PS. that type is.

I can use this
Type: Trimpot
No switch
Power: 0.5 Watts
Base dimensions: 0.9 cm x 0.4 cm x 0.9 cm
Separation of pin: 0.2 cm
1 Return
Square
horizontal
Model: 3386P-1


can you give a pic? I made some kinda universal disposal of the trimmer on the board so any, or majority of, trimmers have to fit into a board without problem.
either to be horizontal or vertical position trims of any sizes will be applicable ...

[sabios]

thank you very much for your kindness.
What kind of questions using potentiometers to
DEPTH 20k
DISC. 50k
GEB 500k
SENS. 20k
T / HOLD 10k

or may be any type of potentiometer only respecting the value.
-------------------------------------------------- --------------------
P.P.S. 100k

and this P.PS. that type is.

I can use this
Type: Trimpot
No switch
Power: 0.5 Watts
Base dimensions: 0.9 cm x 0.4 cm x 0.9 cm
Separation of pin: 0.2 cm
1 Return
Square
horizontal
Model: 3386P-1

[kt315]

Sabios, tracking number is RNxxx, looking at pic. a site for tracking http://www.trackitonline.ru/ (in Mexico track number will be change. do not know a way to track far in your country)
Respectfully yours

[sabios]

by chance you'll have the number of guides to know more or less when it arrives and also to trace.

thank you ..

[kt315]

the board was sent like you ordered with the diode, thank you Sabios.

[sabios]

these boards can be seen by looking at the quality.
now well and made the payment through PayPal.
I did it from my PayPal [email protected]
And I wonder if you showed up and if you do not mind
KT315 ..

These questions well built and good coil boards reach 2 to 3 meters truth.

[sinclairuser]

its a sample sent to kt315, so he knows the quality of the boards being made.