-
-
New price $700, thanks for looking. -
$550 shipping includedComment
-
Hi Kenne-Bill
Maybe with additional informations about this unknown brand of detector it might sell better....
TARSACCI MDT-8000 Hybrid Metal Detector NEW in Box... $1495.00. What Sets the MDT-8000 Apart is its Patented Salinity Balance — Exclusive to MDT-8000. Detect deep gold & coins in black sand or salt surf where single-frequency and conventional multi-frequency detectors typically lose depth or become unstable.
Control Features
• Selectable Frequencies: 6.4 kHz, 9 kHz, 12 kHz, 18 kHz (optimized for coins, relics, jewelry, and gold).
• Patented Salinity Balance: Eliminates the falsing and depth loss common in wet sand, saltwater, and alkali ground.
• Ground Balance (GB): True manual & auto tracking for extreme mineralization.
• Threshold Control: Fine-tune audio background for enhanced target response.
• Sensitivity Control: Adjust for maximum depth or EMI reduction.
• Discrimination Modes: All-Metal (deepest raw depth), Discrimination (tone & ID), Mixed Mode (simultaneous all-metal & discrimination audio).
• Volume Controls: Independent channel adjustment for discrimination and all-metal.
• Backlit Display: Sunlight-readable LCD with target ID scale from -30 to +30.
• Waterproof Coil: Standard 11x9" DD coil, submersible.
• Rechargeable Battery System: Runs on One 26650 3.7 Volt Li-Ion. 30+ Hrs +/- (One Spare)
Exclusive Pulse + VLF Hybrid Technology — Enjoy pulse-like depth with the VLF-style visual & audio discrimination. PI detectors go deep but can't ID targets; VLFs discriminate but lose depth in minerals.
MDT-8000 gives you both at once. Up to 60% More Depth — Independent field testing shows the MDT-8000 can reach 50-60% deeper than standard VLF detectors, even on small targets in mineralized ground.
In Extreme Mineralization Advantage — Where single-frequency and standard multi-frequency detectors struggle with falsing or mis-ID in hot soils, the MDT-8000 retains full depth and clear ID.
In Fast Recovery & Signal Processing — Separates desirable targets from iron trash faster than most VLFs while still hitting on fringe-deep coins and jewelry. Visual & Audio Confidence — Negative VD! readings for deep iron (e.g., -30) save wasted digs;
Why Choose MDT-8000 Over Other Detectors?
- Single-Frequency VLF Machines: Affordable, but lose depth quickly in mineralized soils and saltwater.
- Standard Multi-Frequency Detectors: Good general purpose, but still suffer depth loss in wet sand, black sand, or hot dirt.
- Pulse Induction (PI) Machines: Offer extreme depth, but lack true visual and audio discrimination. In my humble opinion, based on years of field experience, the MDT-8000 combines the best of all worlds and outperforms in the toughest environments—wet salt, black sand, red clay, or mineralized parks—without sacrificing depth or discrimination.
Comment
-
Sold! ThanksComment
Tweet
Comment