Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Got into the forum.........

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Got into the forum.........

    Finally got back into this forum again, wife showed me I was too fast and not patient enough, no other posters other than
    myself from back in August so have nothing to post right now...... Got two subforums, and both are back into early August!
    So all I can do is post that I finally got back in again, doggone viruses...........Makes the computer not connect!
    MELBETA

  • #2
    Went into the second FORUM. I could see before hand that no one has posted anything into my forum. I have posted,
    but for some reason no one else has posted anything, so it looks to me like my two sub-forums are not being used
    used by other users! Now if no one uses either one of my two sub-forums, that means my entrance into Carl's
    forum is useless for me.....................I'm here, but no one else is here so it looks like I am useless to Carl's forums.......
    MELBETA

    Comment


    • #3
      Well, I still struggle trying to get into the internet myself......My wife knows how to get my computer into the internet, but for some doggone reason, I struggle trying to get into the internet.
      Now on COMPASS, in my current internet computer, I got lots of material on Compass Metal Detectors......But I am NOT going to try to get into the older Compass metal detector
      forum anymore as I struggle trying to get into this forum myself! Sometimes it works, other times it does not work. I had in the past an virus inside my computer, but I think it is
      all gone from it now!!!!!
      MELBETA

      Comment


      • #4
        . Click image for larger version

Name:	Modifying 350 Engines.jpg
Views:	82
Size:	112.4 KB
ID:	441825
        I MELBETA, and also BRUCE CROWER, both wrote the same of similiar booklets, regarding the Modifying of the Chevrolet 350 engine, for both better gas milage, and for both better power. I took
        Bruces material, and I took his sheets of technical thoughts, and I wrote a winning booklet, regarding the buying and owning of a Chevrolet 350 car engine. I took it apart, had a 350 Chevrolet car,
        with that particular 350 engine, and since I hopped up my car's 350 engine, I took that engine and that car apart. I still own the Chevy with the 350 hopped up engine, and wrote an explanation booklet,
        regarding the 350 engine, and stuck in my 350 Chevy car, got two of the chevys, one has that 350 souped up engine, other one has an another souped up different Chevy engine, so I am going to stick in the cover
        of Bruce Crower's booklet, which I enhanced the cover for his booklet, and I studied that 350 Chevy engine, and wrote my own booklet on that ENHANCED SOUPED UP ENGINE, got it in
        my technical material, but got the cover of Bruces booklet, with the enhanced cover which I did for the booklet, while writing my own booklet. Technical genius! Got to say I became both the
        technical genius on Bruces Crowers booklet and also my own booklet, which I wrote, but did not publish beyond the creation of the technical material for my booklet. It was too good to
        release out to the public I thought! I combined both the technical material, of what Bruce did, with the techinical material I wrote, on my 1970 Chevy souped up pickup, and my 1971 Chevy
        souped up version pickup. Still own both of the 1970 and the 1971 Chevy Pickups stored on my property... And my souped up booklet?????? Still got it stored in my material on my land!
        Now Bruce did not write a booklet with this cover, I DID!!!!!!! I just had the raw technical material sheets from Bruce Crower! Bruce never wrote a booklet like this shows, I DID!!!!!!!!!!! Bruce gave my
        brother Curley Kaufman Bruces technical thoughts about modifying a 350 engine for super gas mileage. My brother gave me the sheets, died, I studied the sheets, built two Chevy 350 engines, never
        spoke to Bruce about what I was studying or designing, and worked without his knowledge.......

        I took Bruces SHEETS of technical material, and wrote this cover for my booklet. I was going to do a combination booklet with Bruce, but decided not to release all of Bruces technical
        material along with my many sheets of technical. So all I did was design this COVER for a possible combination booklet using both Bruces typed papers and drawing, and my own typed
        paper and drawings, and i would have taken my design of the cover, removed Bruce's name, stuck in my own name, since I did design the booklet anyway, and Bruce did not write this
        booklet that this cover indicates. I wrote it!!!! I MELBETA, AS "The Albany" the actual PUBLISHER, that I created back in 1980. Bruce not only never saw this cover, he never wrote the
        technical material, only gave me some sheets of some technical thoughts that Bruce Crower wrote in a few sheets. I wrote this booklet back in 1980!!!!!!!!!!!!!!! The whole idea, the whole design, of an potential booklet, is mine!!!!!!!!

        I just stuck Bruces Name on it back in 1980, as he started me out on the two Chevy 350 pickups IDEA!!!!!!! I researched and built the two pickups!!!! And I still own both of the pickups!!!!!
        Now this design, looks like Bruce wrote it, but I designed the cover, put his name on it, and I ended up writing the entire booklet, and I still have it saved on an CD disk!!!!!!!! I thought I might published it
        in Los Angels Calfornia, but never decided if I was going to do it WITH Bruce of Without Bruce. Never mentioned it to him either. Just never did make up my mind!!! So all I did regarding Bruce was designed a potential
        cover for the potential booklet. Bruce Cower never saw any of the material. All Bruce did was give some technical material sheets on teh Chevy 350 engine with his own thoughts on it, and I took it all
        the way into the cover, and into building two Chevy pickup engines!!!!!! Bruce gave some technical Chevy engine photographed sheets, my brother gave the sheets to me, died, and I took it into the thoughts
        of sharing my booklet with Bruce, but decided not to go that way at the last minute.My name really belongs where i stuck Bruce Crowers name on the cover design!!!!!!!!!!!!!
        MELBETA

        Comment


        • #5
          This is not a car forum, please stick with metal detector related topics. Thanks.

          Comment


          • #6
            Originally posted by Carl-NC View Post
            This is not a car forum, please stick with metal detector related topics. Thanks.
            Okay........I figured it was like older forums in the past. In them, I could stick in all posts.
            MELBETA

            Comment

            Working...
            X