Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Barracuda Volume

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • martinkayak2000
    replied
    Click image for larger version

Name:	image.png
Views:	41
Size:	33.8 KB
ID:	451013
    Audio Limiter
    For Metal Detector
    One of the improvements for the CS6PI was to lower the resistor Value connected to headphone socket, this made weak signals easier to hear , but loud signals became uncomfortably loud.
    This circuit was developed for the Cscope CS6PI metal detector to limit the audio output, to allow faint sounds to be heard , but limit loud sounds to a comfortable level.
    This circuit could be useful for other Analogue detectors where faint sounds indicate a weak signal.
    This circuit uses germanium diodes to clamp the audio to 0.3 V , but this was still too uncomfortably loud on strong signals , therefore and extra series resistor was added.

    Leave a comment:


  • Matt_Rowe
    replied
    Yes, that's them, i emailed them and they said they where 32ohm speakers.

    Leave a comment:


  • surfdetector
    replied
    Originally posted by Matt_Rowe View Post
    I downloaded a pdf that explains how to add speakers to hearing protectors with pot in each ear muff to adjust sound, whats wrong with that, or buy a set that are made for schools with volume control in ear muffs, i found a link where they are cheap, i will try and find it.
    Here you go:
    https://www.acpdirect.com/LS3000_Lab...FUkyRzA3OprjPt

    Pleasure

    Leave a comment:


  • Matt_Rowe
    replied
    I downloaded a pdf that explains how to add speakers to hearing protectors with pot in each ear muff to adjust sound, whats wrong with that, or buy a set that are made for schools with volume control in ear muffs, i found a link where they are cheap, i will try and find it.

    Leave a comment:


  • Qiaozhi
    replied
    OK guys, calm down. Take a deep breath and .... relax.
    Please try to be friends.
    And no more of this or this

    Leave a comment:


  • pebe
    replied
    KT315. It wasn't my circuit and I had no intention of insulting you (again?) - I was just stating a fact as I saw it.

    But if your circuit is the best you can do, perhaps it is you who needs to read the books.

    Leave a comment:


  • kt315
    replied
    its classic! recommended!

    Leave a comment:


  • kt315
    replied
    if you do not like electronics for dummy so this book is popular

    Leave a comment:


  • DOOLEY
    replied
    entertainment gained by provocation,
    and by reacting to such provocation we perpetuate the entertainment.
    it is our fault for continuing to amuse.

    basterdized drawing is yet more entertainment.

    Leave a comment:


  • kt315
    replied
    still much solutions. you can check.

    Leave a comment:


  • kt315
    replied
    pebe, I say again - your solution is non-working. and pls do not begin again to insult me.

    Leave a comment:


  • pebe
    replied
    KT, you did not understand how Dooley's solution worked and you wanted proof. It was not enough that he said it worked - you had to insult him by implying he was an idiot.

    That is not emotion - its just nastiness!

    Leave a comment:


  • kt315
    replied
    emotions my friend. only emotions. I am too dummy and learn electronics every time of my life. and what?
    I learn all my life and never said that I am guru.

    Leave a comment:


  • DOOLEY
    replied
    right oh,

    so i'm in the wrong then..................

    translation wasn't wrong when the name calling started,

    and during the process of KT searching for a picture and hitting send
    was also a translation error.....................

    don't think so.

    with all due respect to you Thomas,
    i'm not having a go at you,
    personally or otherwise:

    translation can be a problem,
    I agree.
    but please stop defending others actions and making out me to be at fault here.

    enough said.

    can we all just get back to the normal,
    all a bit wiser,
    and where some of us think twice before even bothering to post here at all...................

    Leave a comment:


  • Thomas
    replied
    I guess your Google translation from Google English to American is having problems, I don't care why or what you did, only that you think about what a human dilemma language is for all. I have found that what is scathing to one, is a poke in the ribs to another. Or as they say in my country "lighten up dude" Please do not take that as an assault, only good intent.
    Thomas

    Leave a comment:

Working...
X