Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

best coil for baracuda?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 6666
    replied
    Originally posted by kt315 View Post
    [ATTACH]38334[/ATTACH]
    That global shipping you have highlighted is a rip off and nobody should use it.
    Ask for normal post office shipping or you will not buy the item.

    Leave a comment:


  • kt315
    replied
    Click image for larger version

Name:	xxxx.jpg
Views:	1
Size:	113.4 KB
ID:	347532

    Leave a comment:


  • homefire
    replied
    Why not just do it right ? http://www.potentiometers.com/select...fm?tab=HexSeal

    Leave a comment:


  • jladre
    replied
    You can used ordinary pot underwater up to 2 meter depth..why you guys don't make a pressure test on ordinary pot so that you will see that it will work.

    Leave a comment:


  • multieagle
    replied
    Thank you.

    Leave a comment:


  • 6666
    replied
    Originally posted by multieagle View Post
    No, was just wondering if it was possible to waterproof ordinary potentiometers which can be picked up for a couple of bucks. Whilst the sealed, waterproof pots run upwards of $15 bucks each. This would be for beach and wading only.

    For wading you dont need "water proof" pots if you build the housing correctly, build your electronics into a pvc tube with a water tight screw end, allows you to put coil into the water then make your pot adjustments, put cap on and away you go, yes it does require you to remove cap for further adjustments.

    Leave a comment:


  • kt315
    replied
    Click image for larger version

Name:	3.jpg
Views:	1
Size:	383.4 KB
ID:	347521

    Leave a comment:


  • kt315
    replied
    yup i would like to know how and what pots whites uses in surf pi, but no pics.

    Joe on dec 10 replied me

    Hi Kt, hope u can make some sense of this. If you need other pics will have to wait til after new year when I can get back to it. Thanks for looking and taking time. Joe

    Leave a comment:


  • multieagle
    replied
    No, was just wondering if it was possible to waterproof ordinary potentiometers which can be picked up for a couple of bucks. Whilst the sealed, waterproof pots run upwards of $15 bucks each. This would be for beach and wading only.

    Leave a comment:


  • kt315
    replied
    yes, but for what? they are expensive. do you have waterproof multi-turn potentiometers?

    Leave a comment:


  • multieagle
    replied
    kt315, will this work on multi-turn potentiometers?

    Leave a comment:


  • kt315
    replied
    how to mod ordinary socket to waterproof

    Leave a comment:


  • kt315
    replied
    Originally posted by 6666 View Post
    Now here is the trick to making this coil, after 5 turns the wire will fill the same slot from where you started, move the wire one slot and continue winding another 5 turns and then move the wire one slot and continue , you should not have any parallel wires, and the wire should stack up in the slots.
    Originally posted by 6666 View Post
    When completed 33 turns gave me 320uH.
    .....

    Leave a comment:


  • kt315
    replied

    Leave a comment:


  • kt315
    replied
    The FOX MD company Yekaterinburg is engaged in production of sensors for metal detectors, cases for sensors, metal detectors an automated workplace Quasar, Fortuna M, Fortuna Sq.m. And also offers various accessories for production of sensors and metal detectors

    For order placement, please write PM or on the [email protected] mail.
    It is necessary to specify the Full Name, the address + the postal index, phone No., and an order essence.
    Postage expenses from 350 rubles. Depending on distance and the weight of sending.
    Payment on the card Sberbank, QIWI, Contact. Cash on delivery of +5% to all amount (estimated value + postage expenses).
    We work with the abroad only on an advance payment.
    Sending by Russian Post or other transportation company (in coordination).
    Sending from Yekaterinburg

    Features of coils "FOX MD"
    1. Cases of coils are manufactured of shock-resistant ABS plastic 2 mm thick by method of vacuum molding.
    2. Windings of coils are wound from a high-quality coil-processing wire of a pr-v Russia on the coil-processing machine
    3. Coils are filled in with high-quality ED20 epoxy with the plasticizing additives. The microsphere for reduction of weight of the coil and increase in durability is added to epoxy. For increase in crash-worthiness an internal part of the case and ears are reinforced to a stekloktkanye.
    4. Shielding is performed only by high-quality graphite.
    5. For connection of the coil the high-quality DAXX V52 cable "double coaxial", length 1,2m is used.
    6. For coils the commonly accepted GX-16 4pin/5pin sockets are used
    7. For increase in a resource of a cable, cable input of PG7 with the shock-absorber is used.
    8. In ears of the coil openings by diameter 8/10mm are drilled.
    9. Coils tselnozalivny and therefore are absolutely hermetic. immersion in input to 3 meters is admissible.

    Leave a comment:

Working...
X