Geotech Baracuda optimal tunning

[kosacid]

so whats the best points to take the readings of to set the delay using a duel scope

[homefire]

Adding a pot so you can adjust the Pulse Rate can change things too.

[Koala]

What do you mean by change settings? My baracuda is detecting a small gold ring at maximum 8inch, faint signal, with minimum delay possible. I use basket coil 11".

http://www.geotech1.com/forums/attac...0&d=1459631333



By adjusting the delay Can get nearly 14" on the gold ring but then the fibula is down to 3"


Coil is just solid enamelled copper. Post specs on here but can't seem to find the post

[ionut_mtb]

Don't think there is such a thing as "optimal delay"

Different targets are better at different delays.


I got a selection of finds silver ring, gold ring, fibula and so on and found the best average. If I was just detecting the beach I would change the setting more for gold and less for the copper alloys. As at the moment a ladies gold ring is a couple of inches below its maximum

What do you mean by change settings? My baracuda is detecting a small gold ring at maximum 8inch, faint signal, with minimum delay possible. I use basket coil 11".

[Koala]

Don't think there is such a thing as "optimal delay"

Different targets are better at different delays.


I got a selection of finds silver ring, gold ring, fibula and so on and found the best average. If I was just detecting the beach I would change the setting more for gold and less for the copper alloys. As at the moment a ladies gold ring is a couple of inches below its maximum

[kosacid]

the only thing missing is optimal settings for the delay and test points for to setup with a scope so has anyone got pictures to share and what point they have taken the readings ?