Originally posted by Hyena
View Post
Announcement
Collapse
No announcement yet.
Problems with fresh built TGSL
Collapse
X
-
Chu doesn't seem to be interested in answers so much as he is interested in spinning a top in the mud.
-
Dbanner can you point out a post where it has been illustrated where exactly an oscillator is located on TGSL and how it is used to measure inductance and frequency of a coil?
Leave a comment:
-
Get in Tesoro golden sabre thread and use button "Search thread", you will get only posts in desired thread and I am sure, there are answers for all of your questions.Originally posted by chuubaba View PostI HAVE USED THE SEARCH OPTIONS BUT IT THROWS EVERY THREAD AND POST AT YOU. SOME TIME I FEEL THAT TRUE AND EASY INFORMATION IS KEPT ON PURPOSE. THERE IS DIRE NEED TO IMPROVE SEARCH.
Leave a comment:
-
This is why Administrator is so important, good thing this forum has very nice and patient wise men to fill that role.
Leave a comment:
-
Guys please don't... it does not matter if you offer up your arse to god or not it is the same god leave religion to the clerics or you will both be expelled.
Leave a comment:
-
This is your question I answered. Now stop yelling, calling me miser, asking repetitive questions and READ you lazy praying *******!Originally posted by chuubaba View PostI hope all these are single side circuits.
I made both Tx and Rx coils in clockwise direction. Is this ok?
Leave a comment:
-
I am not expert. I am machinist and CATIA designer. I have no additional electronic education. And I am atheistOriginally posted by chuubaba View PostWhat if i tell you that you are too **** to explain everything in ordinary language instead of complex terminology. Many things are understood when two experts discuss a matter relevant to their expertise but it is a different scenario with novice. I have joined the forum and created the thread for obvious reasons else internet has loads of technical information that i am unable to understand.
I am not lazy. As I came and had troubles with my first TGSL, I read that thread SEVERAL times. That obvious reason for creating this thread is only your lazyness.
And to your question: Does not really matter how you wind your coils. If you get double tone, just swap Rx cables. Even in that thread it is mentioned several times. IT is also mentioned in PDF document...
Leave a comment:
-
What if i tell you that you are too **** (i don't know the exact term to denote a miser) to explain everything in ordinary language. Many things are understood when two experts discuss a matter relevant to their expertise but it is a different scenario with novice. I have joined the forum and created the thread for obvious reasons else internet has loads of technical information that i am unable to understand.
[QUOTE=Hyena;247043]
Leave a comment:
-
I HAVE USED THE SEARCH OPTIONS BUT IT THROWS EVERY THREAD AND POST AT YOU. SOME TIME I FEEL THAT TRUE AND EASY INFORMATION IS KEPT ON PURPOSE. THERE IS DIRE NEED TO IMPROVE SEARCH.
Originally posted by qute1 View Post............ have tried finding threads for things on here many times and using you search.jpg method it just brings up every thread that has any of the words in normally, i will try that "search titles" only though as had not tried that and THANKYOU perhaps that could be made a "sticky" for noobs as very useful (MODERATORS?)
Leave a comment:
-
I PRAY THIS IS THE LAST TIME YOU TOUCH THE RELIGIOUS ASPECT. BECAUSE IT IS VERY EASY TO GO ASTRAY BUT VERY DIFFICULT TO COME BACK. IT IS VERY WISE TO KEEP THE RELIGION OUT OF THIS FORUM. I THANK YOU FOR THE HELP.
Originally posted by kt315 View PostYou are not complaining as if this thread is written on Qooran surahs with Holy mantras on your lips
hard answer eeah?
Leave a comment:
-
Ok kt315 i will react i have tried finding threads for things on here many times and using you search.jpg method it just brings up every thread that has any of the words in normally, i will try that "search titles" only though as had not tried that and THANKYOU perhaps that could be made a "sticky" for noobs as very useful (MODERATORS?)
Leave a comment:
-
i had put this pic 1000th times - no reaction.Attached Files
Leave a comment:
-
In this case, it may be due to a lack of understanding of electronics.
Who builds such a detector, should know what he does and know the functions of the components and the circuit
Leave a comment:
-
Perhaps if the search engine was improved so that newer members could find these threads easily instead of bringing forth every thread with the few keywords it lets you use.
Leave a comment:
Leave a comment: