Ultimate Bandido PCB?

[growdude]

Info

Anyone got any Indo on this.design I'm hey interested in this because of the depth capabilities

[woody]

shame this project stopped i was interested in buying a bandido in kit form (readymade pcb )for the sole reason do not know how to make pcbs and not got the equiptment to make 1

[Leto]

Here today, gone tomorrow...the circus left town.

Yes.. only some traces left

[SVEN1]

Magman rode off into the sunset

Here today, gone tomorrow...the circus left town.

[mdiede57]

PCB etc

Magman116, you mentioned about making PCB's for this, and making an offer... have you considered this any further, and at what price range ?

[WM6]

Why do you think this is an ancestor of Nexus?

Cause I am reading some treads here that discuss Nexus. Some hints of Nexus author about schematic can lead to this solutions or opposite, who know? More provokative question than one claim.

[Qiaozhi]

Nexus ancestor.

Why do you think this is an ancestor of Nexus?

[WM6]

Here are the hand drawn schematics for the Half-Dime.

Nexus ancestor.

[Magman116]

PCB scans of the top and bottom. The Arrows indicate alignment marks.

-Chris

[Magman116]

The transmit oscillator can be changed to operate at any desired frequency. Initially it ran at 15Khz, but was then changed to run at 8.192kHz with a custom 8" or 6" concentric coil. The first build used a Garrett Ground Hog II concentric coil and could get a dime at about 16".

The LM394 is critical to a low noise preamp and is used in many of our designs.

-C

[Sean_Goddard]

VERY interesting, low noise design. I VERY much like the receive amplifier. Good impedence match to the coil and following stages I think.

[driscoll]

Thank you,

Indeed, it is interesting.

A quartz controlled transmitter (like Fisher), LF444 and LM324, a lot of voltage reference, i like it ...

Bests regards.

[Magman116]

Half-Dime PCB component placement.

[Magman116]

Here are the hand drawn schematics for the Half-Dime.

[Magman116]

The schematics are only partly completed electronically. My Partner has them hand drawn right now. I guess I can just scan them and post the scans.

Let me see what I can do today.


-C