Help for MD-3009

[nejdet]

Hello, can anyone show the location of the coils in jack MD3009. Thank you.

[darrenk]

not sure what you mean, but I have just stripped one of these as a donor machine for a surf PI

http://www.geotech1.com/forums/showthread.php?20250-curious-question-on-a-ready-made-coil

[joop]

I think he needs a coil connector pinout.

[nejdet]

connector is disconnected with the wires here

[darrenk]

I have stripped the wires from the board, but this is the pin out for the plug that joins in the stem, this was insulated with tape and bound together, so this had problems aswell

I have done the continuity for the pinouts

[nejdet]

Thank you very much

[darrenk]

no problem, thats you sorted, just need to sort mine now LOL

coil on surf is just humming like a beeeeee