interesting coil shells

[bernte_one]

did anyone know how and where to buy some of These

https://vk.com/wall-33752123?offset=800&z=photo-33752123_375139057%2Fwall-33752123_68513

[eclipse]

Yes I have seen those are made in Ukraine, but the seller didn't ship outside the country if I remember right.

[eclipse]

There you go: http://vk.com/korpussa

"В Беларусь отправляете?"
"Только Украина"

I think it means: Would you deliver to Belarus? Only Ukraine.
But if you want you can still buy it if you have contact in Ukraine

[kt315]

look also

http://www.md4u.ru/viewtopic.php?f=31&t=9631

http://www.md4u.ru/viewtopic.php?f=31&t=4596

http://www.md4u.ru/viewtopic.php?f=31&t=9770

casting housings under pressure http://www.md4u.ru/viewtopic.php?f=31&t=4901

[kt315]

did anyone know how and where to buy some of These

https://vk.com/wall-33752123?offset=...33752123_68513

google image search gives me direct link

http://quasar.ucoz.net/publ/metalloiskateli_ib/quasar_arm/3-1-0-3

[email protected]
[email protected]

bk in address means belonging Belorusia.

this coil is 30 cm diameter in your VK link.

[junkhunter]

whats his email i want one

[junkhunter]

i found him on ebay thanks for your help kt315. dose different sizes

[bernte_one]

@junkhunter

can you say the name from ebay account or link one of his offers
thx

[Waveguyd]

@junkhunter

can you say the name from ebay account or link one of his offers
thx

Hi all. Long time lurker, first time poster. Looking for a housing for my MPP project.
His eBay seller name is SMQ371. Here is a link to the coil above:

http://pages.ebay.com/link/?nav=item.view&alt=web&id=221486502928

Cant believe there are no US sellers of coil housings. Anyone know of any?

[Darin]

Try Dfbowers on this forum, he makes some nice looking shells.
I plan on making my own later for the coils I'm building. I have vacumm table at the shop but we have to get the heat system going.

https://sites.google.com/site/dbcoilshells/home

Hope this helps

[eclipse]

I'm having a hard time finding big mono coil housing (something like 50-60cm).
If I can't find one I will end up spending much time and effort to build one custom.
BTW the link there with ebay coil housing... is advertised for 15$ while it costs 5$ from the manufacturer.

[Ism]

Eclypse, If you're in the states, did you try Bill Hayes in Prescott, AZ?
He may ship international.

[eclipse]

I'm living in Europe.
Anyways I'm planing to make a custom coil, if it doesn't break the bank, but still be probably above 80$ total with all parts and materials, already ordered new lightweight cable.
It can be lightweight and huge in diameter, 55-60cm, because it's not a DD coil so some extra details can be spared.

[KingJL]

Eclypse, If you're in the states, did you try Bill Hayes in Prescott, AZ?
He may ship international.

It was my understanding that Bill Hayes had retired and closed up shop more than 2 years ago... Is that now not the case?

[bernte_one]

hello eclipse
you can make a good mono coil Shell from a big flower pot an a u-Profile
i Little bit German Brown site but good guy Steven Shows how

http://www.thulemann.de/Hobbyecke-_-Projekte/kat-11.htm

the u-Profile can also be place in the middle line
(][)