Tweet
I ,m looking for a shop where i can buy a case for a coil
-
-
diameter 280mm - 11" DD
US $15.90
Coil Housing 31cm - 12" US $26.99
Coil Housing 38cm - 15" US $18.90
Coil Housing 40cm - 16" US $21.99
Coil Housing 18 x 14" US $24.95
https://www.ebay.co.uk/itm/BIG-18-x-14-Metal-Detector-DD-PI-Coil-Housing-by-Hays-Electronics-MADE-IN-USA/263481565865?_trkparms=aid%3D888007%26algo%3DDISC. MBE%26ao%3D1%26asc%3D43782%26meid%3Dc6055d68b9ae4e 1cb19a9d72eb3a67a9%26pid%3D100009%26rk%3D1%26rkt%3 D1%26sd%3D263480472272%26itm%3D263481565865&_trksi d=p2047675.c100009.m1982
-
photo exists ?Comment
-
I bought mine here: https://www.ebay.de/itm/2-pc-metal-d...QAAOSwfZ1WXyVA
Search for "metal detector coil housing" in the german ebay.
They are very good. Factory made. 15 Euro + 12 Euro shipping for 2 pieces.Comment
-
for first try you can use the bottom from a flower pot or round canister
cut out the lower part and Mount the L-ankle from PVC for stem connector
Investment for under 5€, you can fill the enclosure with contruction foam
result is a very lightweight coil Shell for nearly no costs
Comment
-
You can also make it using a cheap coil cover. Many detector shops have a stash of odd coil covers if you ask them.
The top section can be made from either plywood or MDF, and the same for the stem bracket.
Here's one that was made for Raptor from Inside the METAL DETECTOR ->Comment
-
you can also use Frisbee's, I used to before I bit the bullet and bought proper shells.
Comment
Comment