Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Blanket coil ?
Collapse
X
-
Sure! A PI coil does not aways have to be rigid. I built a flexible coil that I could use in my shoe once that worked just fine. I was using it at a 50us delay (I think) with one of the Stuart PIs. It was not super deep or sensitive but it worked.Originally posted by 6666 View Post
-
Why not? Practically all detectors can be converted to pinpointer. The only question is, if the processing is worth.Originally posted by pipdip View PostHi all
I have a discovery World detector which will detect a £1 coin at four inches, I would like to
use the circuit to make a pin pointer.Would this be possible with this type of machine.
Thanks pipdip
Comment
-
Hi Guru
I'm going to give it a go, one thing that's puzzling me I opened the 5 inch search head it has two coils 9 ohm's and 1.5 ohm's also it has this one coil of wire that goes full circle amongst
the others and the ends are 1/8 inch apart and are notched in the plastic head?
I guess i will have to use finer wire?
Pipdip
Comment

Comment