Tweet
I ran into a really nice deal on a JW Fisher's Pulse 8x boat deployed coil. I would like to use it on my Pulse 8x. I do not have the optional bulkhead fitting adapter installed, however, and really don't feel like spending 300.00 to get it installed by Fisher's. I never intend to dive with the unit again...I just want to install it on my boat and use the control box topside. The coil has a 4 pin connector. The pc board has a 2 pin connector to the coil. I get 1.4 ohms between two of the coil pins and open everywhere else. Are two of the connector pins "dummies" or are they wired together in some way?