TX impulse in georadar
speedy google translation.
Principles of producing high-power high voltage pulses of short duration
Trying to explain obscure terms ham
Pulse shaper disconnect power in parallel with the load
Pulse shaper using a Marx generator
So, out of view of parameters and characteristics GPR, we found that the transmitter antenna to serve single pulse (also called video pulse) voltage of several hundred volts and duration, depending on the selected frequency of the antenna, from a fraction of a nanosecond to a few nanoseconds. Just as in the metal detectors, "breaks" the ground only a major boost. We are talking about currents of hundreds of amperes for those few nanoseconds. Since the pulse repetition rate is relatively low (in relation to its length), this crazy power "smeared" by a huge duty cycle up quite normal values.
Here is an example: Transmitter "Geotron" generates pulses 600 V and a duration of 4.3 ns. Peak current 10 A, peak power 6000 VA. Pulse repetition frequency of 42 kHz, which gives the average power (per hour), about 4 watts. Current consumption of the transmitter battery life of about 300 mA (total current consumption of 700 mA GPR). In this device, the lithium-polymer battery and 10 ยท h, which allows you to work without charging for about 14 hours.
For proper operation of the transmitter must first convert the unipolar pulse (single pulse) in the video pulse - ie add a second half-wave - and then through a matching device file video pulse to the antenna. This is done using segments of transmission lines (delay lines). An example of such a solution you can see below, under "pulse shaper based on Marx generator." Its essence is that the output impedance of the generator is connected delay line (LZ) with half the load impedance for each part. The length of the line is calculated from the length of the single pulse - say, for the single pulse length of 3 ns need need two lines of 1.5 ns and an impedance of 25 ohms. The momentum from the generator will run until the end of the grounded LZ, reflected from it, reverse polarity, and running back after 3 ns. Then a simple adder, consisting of the output impedance of the generator and the load, the addition of these pulses will - of course, with the loss of voltage. The output of a video pulse.
Announcement
Collapse
No announcement yet.
can we help us to make device like this!!!!
Collapse
This topic is closed.
X
X
-
Hi saleh, why you don't ask your "some body" instead of asking us?Originally posted by saleh View Post
Before two months visited me a some body has a device to descover any thing under ground with very high long range .
In the end this mission he gave me video for the treasure placebo which was burid in range 7 m. under the ground .
the targets being detected are some boxes filled by peices of stell and iron ,its size about 30cm * 40cm, i buried them at deep 6meters.
He gave you promotional video you posted, but targets on video was buried by you(rself)???
At the end, you will "discover" those strange LRL, with adequate price of course, don't you?
And now we need fall for this cheap advertising LRL gimmick?
Old known story.
Leave a comment:
-
I'm trying to decide whether this really belongs on the Long Range Locators site at www.longrangelocators.comOriginally posted by saleh View Postthanks mr. Qiaozhi, the targets being detected are some boxes filled by peices of stell and iron ,its size about 30cm * 40cm, i buried them at deep 6meters.
but , can you help me to make device like this?
good bye
No-one will be able to help you make a device like this without a great deal more information than you've provided.
Leave a comment:
-
Kostin
videoimpulse of georadar http://phazitron.narod.ru/geo/geo_tr.htm
that is REAL georadar, not a fake.
as it would be really looking.
Leave a comment:
-
Originally posted by Qiaozhi View PostWhat are the targets being "detected" in the video, how big are they, and how deeply buried?
thanks mr. Qiaozhi, the targets being detected are some boxes filled by peices of stell and iron ,its size about 30cm * 40cm, i buried them at deep 6meters.
but , can you help me to make device like this?
good bye
Leave a comment:
-
What are the targets being "detected" in the video, how big are they, and how deeply buried?
Leave a comment:
-
mr.kt315 thank you for reply.
can you give me Ivan Kostin`s address or his e.mail because I want talking with him.
Mr. vortxrex thanks for your reply
size of the film is more 12 mb. i but it for you in this link, please see it.
Leave a comment:
-
sorry, but what you tell is not a georadar. I know only one guy who did REAL georadar. his name is Ivan Kostin living in Ukrainia.
Leave a comment:
-
can we help us to make device like this!!!!
Before two months visited me a some body has a device to descover any thing under ground with very high long range .
then , I took him to detect Treasure placebo when we reached the place ,he started in his mission via two laptops and source of waves.
He is using two laptops one of them has main programe (he not allowed me to see the programme he said this is secret) but I think he using ( GPR , AUTO cad and workflow . visual basic.targets)
The second laptop with him walk on the target places and see under the ground and see the dark in the night like the day(sunny day)
He joined all two laptops via blue tooth using this piece( cy2198tr – A wireless RF Transceiver 433MHZ fsk) which can join laptops together and it gives the laptop which with this person when he walking above the target places give it strong wave .
Note: this laptop consider as reader
I think he uses radio waves ..
In the end this mission he gave me video for the treasure placebo which was burid in range 7 m. under the ground .
this device can photo any thing under the ground live vedio as any picture very very clear!!!!!
Is there any body make device like this .
This person use programmes only .
I WILL PUT THE VEDIO IN NEXT REPLY.Tags: None
Leave a comment: