2nd Chance PI

[syavash]

A friendly word of advice:
When posting in a forum it is not good practice to post using only CAPITAL LETTERS.
This is the equivalent of shouting, and is not good forum etiquette.

Hi
OK.
Your Right.
It Was Mistake

[Qiaozhi]

HI DAN,
I MADE THIS PROJECT VERY EASILY FROM YOUR DOCUMENTS.
AND SO THANKS FOR YOUR FAVORE.
BUT
PLEASE GIVE ME SOME USEFULL INFORMATION ABOUT MENU ITEMS SETTINGS.
I AM NEED THAT.

VERY THANKS

A friendly word of advice:
When posting in a forum it is not good practice to post using only CAPITAL LETTERS.
This is the equivalent of shouting, and is not good forum etiquette.

[syavash]

Original concept of ChancePI is back
Just replace CPU onto ATmega328 and use this firmware.
https://chomikuj.pl/dantech/2nd+Chan...ip(archive)

HI DAN,
I MADE THIS PROJECT VERY EASILY FROM YOUR DOCUMENTS.
AND SO THANKS FOR YOUR FAVORE.
BUT
PLEASE GIVE ME SOME USEFULL INFORMATION ABOUT MENU ITEMS SETTINGS.
I AM NEED THAT.

VERY THANKS

[dantech]

Original concept of ChancePI is back
Just replace CPU onto ATmega328 and use this firmware.

https://chomikuj.pl/dantech/2nd+ChancePI/Firmware/ChancePI_002,10261584780.zip(archive)

[dantech]

firmware v057

[dantech]

Please report me bugs and suggestions.

[dantech]

firmware v056

[Detectorist#1]

Hi dantech,
This answer closes this discussion.

[dantech]

A the moment I do not have atmega8 with original firmware to compare both ones. Personally I am not interested to compete

[Detectorist#1]

Hi dantech,

Please give us comparison in real differentiates between Fe targets and no-Fe targets recognition for SMALL size targets for original Chance PI and 2-nd Chance PI. The more reach software settings will be useful only with more useful results.

[dantech]

??? Have you ever seen original Chance PI? I am in doubt
The only common things with original Chance PI (developed by AndyF) in the menu are: low battery setting, audio steps ....hmmm... thats all.

[Detectorist#1]

As the first Chance PI, the new second chance haves the same moderate parameters. One more DIY PI MD!

[dantech]

https://youtu.be/3IRIUnZxOR0?si=ACS6OqfAKuSdw_ID

https://youtu.be/GVtev6TSSuo?si=PPNCD6u8U2lCrJDf

[dantech]

https://youtu.be/auVEDna-l6Y?si=ixvEIhyvYSXVZPiv

[dantech]

firmware v053