Pulse Star II (first analog version)

[kt315]

Yes.

sorry, i can not ask this more. Carl banned me to do.

• Your requests (often sounding like demands) that people post photographs of PC boards has become annoying to others. As of now, you may only make these requests directly to the person using private messaging. Please do not use the forum to request this kind of information, or to instruct someone that their photos have bad lighting, etc. I will simply begin deleting these kinds of posts, as well as those that attempt to insert political commentary.
  
  Thanks,
  Carl
• 
  kt315 08-15-2024, 12:49 PM
  Dear Carl
  i just want to reminder my this topic with do pics better was in OFF TOPIC subforum. NOT in main stream. i just give the link. but somebody deleted the subforum (for what?) and yes i am forced to ask people sometimes.
  
  i do not do political commentaries never. Involution Theory is NOT political issue, just the REAL truth. Darwinizm is lie of/from High Britain Freemasonry. Darwin was freemason, his father was Britain Freemason.
  
  pleasure

[dbanner]

Thank you for your hard work.
A clear picture of the main board is required.

Yes.

[aft_72005]

Remember, my drawing is bound to contain few errors. I am still unsure on few tracks on top side. I am still working on those, also I need to adjust track widths and clean up everything as best as can be done.

Thank you for your hard work.
A clear picture of the main board is required.

[pigeon]

Remember, my drawing is bound to contain few errors. I am still unsure on few tracks on top side. I am still working on those, also I need to adjust track widths and clean up everything as best as can be done.

thank you so much

[dbanner]

Remember, my drawing is bound to contain few errors. I am still unsure on few tracks on top side. I am still working on those, also I need to adjust track widths and clean up everything as best as can be done.

[pigeon]

Unfinished.
[ATTACH]n427260[/ATTACH]

THANK YOU SO MUCH CHOKRAN

[dbanner]

Unfinished.
[ATTACH]n427260[/ATTACH]

[star]

[dbanner]

I continue to work. Almost done.

[star]

[aft_72005]

Unfortunately, I don't have them anymore.
I deleted them from my drives a long time ago.
What I have is what a friend gave me to whom I promised not to post it on the forum or share it with people via email.
I'm really sorry, I apologize!

Any way ...ok

[ivconic]

Unfortunately, I don't have them anymore.
I deleted them from my drives a long time ago.
What I have is what a friend gave me to whom I promised not to post it on the forum or share it with people via email.
I'm really sorry, I apologize!

[aft_72005]

Only schematic that i have is from some Turkish forum. Full with mistakes.
Luckily i got original pcb boards and i made it respecting those.
I intend to draw most proper schematic, relaying on present state at working pcb.
But it would be pretty tedious job... i will need some time.
As you maybe noticed; i used only "motherboard" so far.
Also i plan to populate "discriminator" board too.
Other 2 boards (front and rear panel) i don't intend to use.
Original charging part (on rear pcb) is obsolete and total overkill.
I have much simpler and easier charger on my mind.
Front pcb also is not suitable for me; due some components and volumes that i can not obtain.
Instead i will draw my own front panel pcb with components that i can obtain here.
Only "motherboard" is relevant. And maybe "discriminator", not sure yet, will see soon.

Hello Ivconic
I know that you promised the north, but I don't want the circuit that you promised. I want photos and schematics from that Turkish site.. The same schematics you said are wrong... That Turkish site no longer exists.. Please send them here or to my email.
thank you.
my email [email protected]

[Mehr076]

5,4 = Coil
1,3 = Charger Gnd
2 = Charger Plus

Can you send me the circuit, thank

[email protected]

[Mehr076]

5,4 = Coil
1,3 = Charger Gnd
2 = Charger Plus

Can you send me the circuit pulse star ll, thank you
[email protected]