Pulse Star II (first analog version)

[ivconic]

All Pulse Star models are compatible, sharing the same coils, chargers and pin assignments.
So the answer is yes it does.

[kt315]

thank you! i googled and found this for PS II Pro https://www.tb-electronic.de/downloa...or_assy_v3.pdf
does it fit PS II too?

[ivconic]

5,4 = Coil
1,3 = Charger Gnd
2 = Charger Plus

[kt315]

коллеги, прошу вас дать распиновку разъема катушки - каие пины для заряда, пины для катушки?

Colleagues, I ask you to give the pinout of the coil connector - what are the pins for the batt charge, the pins for the coil?

HELP.

[ZOUjiarui]

on this stage

Can you measure its frequency, pulse width, delay?

[kt315]

on this stage

[ZOUjiarui]

The lp5, psg, and ps2 on the forum have not been revealed so far, and they are still trade secrets to me. The only way to get him is to spend money to buy it, or buy a bunch of parts and study it yourself. For experts, they don't bother to copy these backward products. It is a wise choice to buy him if you want

[ZOUjiarui]

Never found any complete pulsar information. psG is not usable either, only a complete revamped apulse

[kt315]

at this stage

[usefi5961]

Dear all members,can anyone send me schematic and pcb file for ps2 ([email protected]).
thanks

[kt315]

removed switch pin, 2P. corrected pic.

[kt315]

i'll make photos at sunny day, a link on archive will be refreshed with the pics. but... black epoxided block with a pcb inside there...
i can not open/dismantle it because i got PS-II just for repair.

[ZOUjiarui]

There are no clear photos of the circuit board.

[kt315]

got a batch of the switch... just 1mm of a gap left there... must do now.

[Emersonpaz]

https://a.aliexpress.com/_mtGxnNy