Bulgarian 'PULSE STAR' (... close to Legendary one)

[danny475bek]

hi

i guess japanies has built it and it workes fine with him thats why he compares it with the other md's so i dont know if ther is any problem with the pcb
hers the picture of the complet project from thunting
nice hunt
danny

[danny475bek]

hi

hi wm6 how are you
ok this pcb are old i have another pcb but i dont know if it workes or no i guess it workes becouse in thunting ther is a forum called TO ALL THE DIFFERENCES BETWEEN DPB2010,DELTAPULSE,PULSESTAR-BG the pcb of the pulsestar bg id the
single side one pcb and the power pcb here is the file with the wright dimentions

[WM6]

i'm sorry i dont download the file becouse of me low speed and the file was big alitelbit

Low speed? It is only 57 kb.

Ok we can try with 4 parts of picture out of Geos pdf (ask Geo for PCB dimensions):

[Geo]

I believe that on this forum you will find everything you want. If you will construct the pcb that i post... becarefull with the position of the transistors. It is better to tell me.

Regards

[danny475bek]

hi

hi wm6 hi george
i'm sorry i dont download the file becouse of me low speed and the file was big alitelbit
so plese forgiv me
thanks to u
danny

[Geo]

hi how are you
nice news
is that wright
is the pcb wrong or it hase some erors?
and can i made that or no i mean the pulse star bg
i dont know what to say i'm sory
but can i have some data about it i maen the wright pcb and the wright scamatics
so hers my e-mail
danny475bek"hotmail.com plese can you send me the wright data
see you

Hi.
I attach the pcb that i made my project. I think that the designer is HumHum.... not sure!! There are errors at the transistors. You must reverse them 180 degrees. The power supply from the same designer is wrong, so make an other power supply or make what KT315 post here. I finished it but i have not time to connect all together with potentiometers, coils etc. Maybe next week.

Regards

[WM6]

hi how are you
nice news
is that wright
is the pcb wrong or it hase some erors?
and can i made that or no i mean the pulse star bg
i dont know what to say i'm sory
but can i have some data about it i maen the wright pcb and the wright scamatics
so hers my e-mail
danny475bek"hotmail.com plese can you send me the wright data
see you

Hi danny

read again Geo's previous post.
He wrote: "I found all the info in the forum ..."

Moreover, kt315 gave you all data again as deposite file.

Schematic is OK, on other data you can wait on Geo's final report.

So what else do you want, Lemon juice?

[danny475bek]

hi

hi how are you
nice news
is that wright
is the pcb wrong or it hase some erors?
and can i made that or no i mean the pulse star bg
i dont know what to say i'm sory
but can i have some data about it i maen the wright pcb and the wright scamatics
so hers my e-mail
danny475bek"hotmail.com plese can you send me the wright data
see you

[Geo]

I begun to construct it. No email .... or anything else. I found all the info in the forum and i begun it. Also i found some mistakes at the pcb (it is not from Georgi) but i edited them. When i will finish it, i will inform if it work and how good or bad

Regards

[kt315]

do not nerve my friend.
all archive is keeping in VERY trusted hands, believe me now.
all info on Bulgarian Pulse Star detector take here -

http://depositfiles.com/files/klmoj1xvr

[danny475bek]

hi georgi

i don't know why your keeping this protect far from the members ?
is it a nuclear bomb? its a matal detector only, isent it
i have post two or three posts to know if the project worked well or not and if it is i was asking for the part list of it and than i realized that there is no reply and all of the members are posting there mails and sombody is sending it to them by e-mail
every person should post his or her mail to send him or her the complete project.
what is this, whats going on we are here to share the ideas and com on with a true success,
so i don't know should i post my e-mail too or you will post the complete project, or its not full yet, i don't know what is the problem
please can you say any thing about it
geotech team

[Geo]

Hi Georgi.

Did you test the detector with old ceramics???
Has it the ability to reject them??

Regards

[Geo]

wire 2x2mm*, only single wire used !! 12 turns single wire 2mm* OK?

Thank you georgi. I begun to construct it. Today i finished the power supply. I beleive this week to finish the detector and to test it.... Maybe to find problem with the unijunstion, and to modify the pcb so to work without it.
It will be a good contradistinction with the TDI.
I wish you the best on 2011

Regards

[georgi.g.zhelev]

coil

Hi Georgi, nice to read something from you again.

You mean double speaker cable with both wire connected togheter in paralel or only single wire used?

Happy and successful 2011 for you.

wire 2x2mm*, only single wire used !! 12 turns single wire 2mm* OK?

[WM6]

Happy 2011! PULS STAR-G; COIL 1 m x 1 m ; 12 turns, wire 2 mm*, for Speaker

System, Silicone izolation.OK?


G.L.!

Hi Georgi, nice to read something from you again.

You mean double speaker cable with both wire connected togheter in paralel or only single wire used?

Happy and successful 2011 for you.