If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
A pulse inductive metal detector that includes a variable resistor for controlling coil characteristics for both transmitter and receiver modes of operation. A coil coupled with an electronic switch is charged with current from the power source in a transmitter mode such that when the electronic switch is abruptly switched closed the coil emits a magnetic field that induces eddy currents in a metal target. Once the transmitter magnetic fields have decayed enough, the coil can be operated in a receiver mode to detect a magnetic field resulting from eddy currents in the metal target. The variable resistor is coupled across the coil for varying the resistance across the coil to optimize the pulse inductive metal detector sensitivity to the metal target.
Tweet
Comment