Minelab GPX-5000 battery 5 pin plug

[cristiano.sar]

Does someone has the exact type/name of the 5 pin connector used in the Minelab GPX-5000 battery? I want to buy some connectors to build a custom cable but I can only find other types of connectors, because the Minelab one is male in the cable side and female in the control box side.
I usually search for "GX-16 5 pin make connector reversed" to find these, but if someone has a better name for it, may be it will be easier for me to find he exact component.

Thanks.

[cristiano.sar]

I think I found what i need: https://pt.aliexpress.com/item/1005007358415419.html

[eduardo1979]

https://a.aliexpress.com/_EwX1Jlu

[pito]

make sure you order right size, by mistake i ordered G16 Instead G12, numbers are diameter

[cristiano.sar]

Thank you, you are right, it is the GX-12

[pito]

https://www.aliexpress.com/item/1005...origin_prod%3A

[cristiano.sar]

Thank you, but the ones I need have a slightly different format:

[eduardo1979]

https://a.aliexpress.com/_EvG5vvY

[cristiano.sar]

thank you, it is eactly that, although I am searching only for the connectors (I want to make a shorter cable). I can reuse the ones I have, but I would like to keep some spares.

[cristiano.sar]

I bought it, I think really it is the GX-16 (16mm diameter on the thread) and around 12.5mm in the socket.
I will tell you if it works when it arrives. Thanks
https://pt.aliexpress.com/item/1005007358415419.html

[cristiano.sar]

another question, some knows where can I find these kind of protective "glands" (dont know the correct name for that):

thanks.

[Carl-NC]

Heat shrink tubing, I assume.

[Nightryder]

Try searching with these keywords:

Heat shrink dual wall or thick wall

[cristiano.sar]

Here is the short cable I built. The correct connectors are those ( https://pt.aliexpress.com/item/1005007358415419.html - GX16 5 pin reversed), although I reused the original ones that where in good condition.

I used high voltage heat shrink (they have a thick wall).

Thanks all for the help.

.