my personal colection

[TOYO]

layout from super scan Looks good, double sided Version could be much smaller
but it is ok for diy project

i made a new pi from GS4 and Superscan ........PCB is 12.8cm X 9.5cm.

NEW SUPERSCAN PCB is 14cmX8cm

Αnd my new Duble PCΒ Bone above the other is 12.5cm X 5cm

[bernte_one]

layout from super scan Looks good, double sided Version could be much smaller
but it is ok for diy project

[TOYO]

yes Toyo .circuit super scan.
How it works 5v regulator. Not connected gnd

[ATTACH]42414[/ATTACH]

+24v is the ground my friend on superscan and in most pi detectors.the circuit is correct and works very fine.

[sbalio1]

yes Toyo .circuit super scan.
How it works 5v regulator. Not connected gnd

[TOYO]

Why the voltage regulator 337 is not installed

there is no reason

[karim1980]

Rospy pi detector deepscan 24V. Coil 300-450mH

[ATTACH]42382[/ATTACH]

Thank you mr toyo


Why the voltage regulator 337 is not installed

[TOYO]

talked about superscan circuit or another project ?

[sbalio1]

Toyo... thanks for sharing

superscan circuit. I saw some changes in the sound level. and also lacks some components like lm 337

[TOYO]

[Qiaozhi]

i made this BEACON for transmitter.Αt the beginning I did for my friend to use it for goldgun like transmitter.
I make a sensitive receiver and i test for reflected signals.

if you want other circuit tell me.
i'm sorry for my english.

Before the conversation diverts off into lah-lah land, please note the following from the forum rules:

Also - we no longer discuss so-called "Long Range Locators" (aka LRLs) or dowsing in the Geotech forums. If you wish to discuss these subjects, please register at www.longrangelocators.com

[TOYO]

Toyo, thanks for sharing your Archive

can you say something to BEACON Project from your 2nd posting

i made this BEACON for transmitter.Αt the beginning I did for my friend to use it for goldgun like transmitter.
I make a sensitive receiver and i test for reflected signals.

if you want other circuit tell me.
i'm sorry for my english.

[Tim]

Thanks Toyo. A couple here I don't have.

[bernte_one]

Toyo, thanks for sharing your Archive

can you say something to BEACON Project from your 2nd posting

[TOYO]

VLF Detectors Circuits.....AND MANY OTHERS

[TOYO]

C scope VLF Detectors Circuits

C scope VLF Detectors Circuits