If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
sbalio1 this is an obscure place to post this request. For any reply you should post in schematics, BUT not before using the search/advanced search. HAVE A WOMANS LOOK.
There are more files here.
I think in healthy way IT IS OK to answer question where to find more Info. But no more discussion on lrl devices. Or just write a p.m. IT is also possibke
As mentioned earlier, we do not discuss either dowsing or LRLs (and that includes PDKs) in the Geotech forums.
Please continue any such discussions at www.longrangelocators.com
As mentioned earlier, we do not discuss either dowsing or LRLs (and that includes PDKs) in the Geotech forums.
Please continue any such discussions at www.longrangelocators.com
For clarification Toyo is this circuit a detector in its own right, or a receiver circuit where RX coil needs to be inductively balanced to a separate TX coil and circuit?
is a VLF Receiver .actualy is the receiver off HEATHKIT with more sens.
For clarification Toyo is this circuit a detector in its own right, or a receiver circuit where RX coil needs to be inductively balanced to a separate TX coil and circuit?
is a VLF Receiver .actualy is the receiver off HEATHKIT with more sens.
thank you TOYO
Do you have Data of the coils (inductace ,thikness of the wire. thickness of the ferrite rod)?
- the valeur of resistance that connected at pin 2 of 555 in circuit 680k but in pcb 470?
- in pcb the capacitor 100uf not placed?
Leave a comment: