If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hello to all friends
Has anyone built this circuit and
I would appreciate it if you could tell me about your experiences about the performance of this circuit and whether it is effective in the environment.
Is this circuit really capable of ground balancing?
AF108 is my unfulfilled wish, to somehow come into possession of the original.
Unfortunately, there are not many of them and they are hard to find.
And it is even more difficult for me to buy from abroad because of the very restrictive customs of my country.
I am interest Sascho's SBG pi circuit because has ground balance circuit .
That's why I started simulating the circuit at first.
I read the previous posts, people were planning to build it.
Has anyone succeeded in making the circuit?
An example of a schematic I'm working on. It's a redraw of the AF108 but without the frills. I'm playing around with sPlan 7.0 , getting used to it. I kinda like it.
Sacho's schematics remind me of the The Voynich Manuscript, for some strange reason it comes to mind.
An example of a schematic I'm working on. It's a redraw of the AF108 but without the frills. I'm playing around with sPlan 7.0 , getting used to it. I kinda like it.
Sacho's schematics remind me of the The Voynich Manuscript, for some strange reason it comes to mind.
Even better rendition. Perhaps this is how a well drawn schematic is supposed to look. However, I'd much prefer a poorly drawn circuit that works, rather than a well drawn circuit that goes up in smoke.
...Circuits are easier to follow when drawn properly.
Exactly!
That's exactly what I wrote at least 50 times in the past 20 years!
I don't want anyone to misunderstand me.
But Sacho is full of schematics and has published quite a few so far.
He made arrogant bold statements with each one.
But until now, in the last 20 years, I personally, unfortunately, have not seen ONE video showing that any of his schematics actually work and are even worth something.
Once upon a time, naively, I tried to make a couple of these things.
Nothing ever worked!
Of course, if you dare to write such a thing publicly on the forum; immediately he appears, full of anger, ready to argue and always gives the reason "your ignorance and incompetence are to blame for it".
That is why all that he has published so far; I threw in the trash and I've been trying to totally ignore such trash for a long time.
I wouldn't comment anything here now, but you pulled me to just confirm that great truth.
A terribly poorly drawn schematic that looks like it was deliberately and consciously complicated by the most nebulous way of drawing; probably seems "advanced" and "profane" to some retarded mind.
But when you redraw it in a good way, then you can clearly see that it is a rather rudimentary and extremely backward project.
Which has very little chance of ever working very well.
If I were you, I would give up on that nebula and turn to projects that have already been confirmed on the forum by many members who have already done it.
This is just a waste of time.
Leave a comment: