HE/SHE HELPS TO PROGRAM PD3200 OR THE FILE TO PROGRAM IT

[torrente1976]

I NEED HELP TO FIND SOME FILES TO PROGRAM AN IC "PD3200" TO USE IT AS DETECTING OF DIGITAL METALS I HAVE ALL ALONE ONE I LACK THE SOFTWARE, AND BUT WHERE I CAN FIND THE MANUAL TO PROGRAM IT WITH ALL THEIR COMMANDS INS MA A GREETING TO ALL THOSE OF THE FORUM

[diggerbarns]

I never heard of the PD 3200 who makes it.

If you wan't to mess with micro's get into PIC's from Arizona Microchip
the world and is brother will offer advice then.

[Esteban]

Several times persorns post about this detector. Here the schematic, PCB, etc., but, of course, no the codes of the "upgrade" version, only "demo".

http://www.pulsediscriminator.com/

[torrente1976]

NEED HELP THIS IS DIFFICULT TO PROGRAM ATMEGA8 FOR PD3200

I have BEEN ABLE to PUBLISH THE FILE PD3200DEMO.HEX WITH AVR STUDIO V4.0 IF ALQUIEN KNOWS HOW to PROGRAM MICROCONTROLADOR ATMEGA8 DE ATMEL AND he/she UNDERSTANDS THE OPERATION OF THE DETECTOR THAT THIS IN it PAGINATES IT OF DISCRIMINATOR it PRESSES 3200 it will BE HIM/HER EASY to FINISH THE PROGRAMMING OF MICROCONTROLADOR AND he/she will HAVE A GOOD DETECTOR OF COMMERCIAL METALS OF CHARACTERISTIC he/she would THANK THAT IF ALQUIEN CONSIQUE THIS THAT I SEE IT A little DIFFICULT SENDS ME THE FILE FINISHED PD3200.HEX. DE Moment Will Study the Topic and I Go for Long If I Don't Obtain Help

[NorthWestern]

I’m not sure if your asking how to program the Atmel range or for the full version of the software.

If you are looking to learn how to program the Atmel part then http://www.avrfreaks.net/ is a good a place to start as any.

[Unregistered]

Oh its very interesting. Could you provide me more information ?

[email protected]

[email protected]

[Sean_Goddard]

I bought two of these kits for evaluation and I have to say that it certainly lives up to the claims made for it. So much so that my Goldscan PI and my Minelab Sovereign are going on EBay ASAP. BUY ONE it's WELL worth it.

I will post pictures of mine whan the case arrives (at the moment it's a pile of bits on the bench).

[Unregistered]

pd3200

hello.
I have built PD3200. But it doesn't go to DISC mode. What is the problem??
In PCB, J12 (to which CLEAR and MODE bottoms are connected) doesn't work too.
Would you please help me??
Regards
[email protected]

[Ir HMY]

www.pulsediscriminstor.com the link pD3200 is dead link, much appreciate if you can email me the schematics.
[email protected]

[Geo]

hello.
I have built PD3200. But it doesn't go to DISC mode. What is the problem??
In PCB, J12 (to which CLEAR and MODE bottoms are connected) doesn't work too.
Would you please help me??
Regards
[email protected]

If you use the Demo program then you can't go at disc mode

[Unregistered]

If you use the Demo program then you can't go at disc mode

According to Carl, it appears that you can`t discriminate with "most" PI detectors as he mentioned in HHMeter thread.