5900-6000

[Geo]

Hi all. I would like the schematics from the whites 5900 or 6000di pro. I want to see the way that makes the shift of phase and the signal preamplifier. Because I believe that they is rather the more powerful detectors of Whites I want to experiment a little with the stages that I mentioned before provided that I find the required time. Likely somewhere there I stop the manufactures and my communication with you:mad: because serious reasons of health :mad: :mad: impose it to me(at least this interval).
Regards

[Leto]

W6000DiProCB

Hi Geo..
I got W6000DiProCB shematic from other visitor of this forum...but's too big.
If I shrink the resolution to 256kb picture get useless.
I could split picture in sections... but you know the problems afterwards with such posts.
It's not possible to send splited zip archives as these have not valid extensions.
Last way is to rename files to .pdf (585.9 KB) .. but that's dirty game

Geo just send me your email as the one you have listed here is not valid.

P.S. I wish sincerily that illness goes away.

[Carl-NC]

Leto, email it to me and I'll post it.

[Leto]

File sent ... thanks

[Geo]

Thanks

Thanks
[email protected]

Best Regards

[ivconic]

SPAM !!!

:mad: :mad: :mad:
Geo, i wanted to help you,so i packed whole 6000 project in a zip file and sent to your e-mail....later i received this message:

************************************************** *
"Hi. This is the qmail-send program at yahoo.com.
I'm afraid I wasn't able to deliver your message to the following
addresses.
This is a permanent error; I've given up. Sorry it didn't work out.

<[email protected]>:
193.92.150.24 failed after I sent the message.
Remote host said: 554 5.5.0 Your message was considered to be spam by
the FORTHnet Antispamming Policy and was not delivered to the recipient.
The following spam tests returned positive for this message:
FORGED_YAHOO_RCVD,RCVD_IN_SBL-XBL. For further information visit
http://postmaster.forthnet.gr

--- Below this line is a copy of the message.

Return-Path: <[email protected]>
Received: (qmail 7368 invoked by uid 60001); 23 Dec 2006 00:42:58 -0000
Message-ID: <[email protected] .com>
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
s=s1024; d=yahoo.com;

h=X-YMail-OSG:Receivedate:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID;

b=e7gZ8fG0H8+XVPrweeExB44eSGyboC9w7ErZjVgCq/CotUAzlTbFeg60uBZjl7TLpZy0SokLnHbU+v053AJ2K3vrKQZC IUiT1zC30ThVQVq6EyrjU+1AfEz0NVbcM3qio7w00sMjUN5XGL eAFeFv4/qarqR9ci8qpzJ9UfxZhH0=;
X-YMail-OSG:
jmBJTwkVM1kakXlkB9WZb1RGUSk2k9NJK3gWtC3sbNyFx6L3C3 mPKvnrE652wC2ipRRj7IDwL0YtV1xojrZiciIW1gnAhhMBWoPG
Received: from [194.106.187.248] by web32207.mail.mud.yahoo.com via
HTTP; Fri, 22 Dec 2006 16:42:58 PST
Date: Fri, 22 Dec 2006 16:42:58 -0800 (PST)
From: Ivica Conic <[email protected]>
Subject: 6000
To: [email protected]
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="0-861842396-1166834578=:2881"
Content-Transfer-Encoding: 8bit

--0-861842396-1166834578=:2881
Content-Type: multipart/alternative;
boundary="0-1110825821-1166834578=:2881"

--0-1110825821-1166834578=:2881
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Hi Geo!
Here is 6000 schematic.
By the way do you have any good coinshooter project to send to
me.With all datas for it;
pcb,coil explanation and all.I would like to make one good
coinshooter for me this winter.But i do not have neither one schematic that suits
me. I do have some uncomplete projects like very interesting Coinhawk,
but i do not have pcb for it. I do not have condiions for smd type pcbs
to make, only conventional....If you have some idea,please send me via
email.

Jasu Geo!
regards
************************************************** **

So, it cosidered as SPAM!?!?!?!?

Zip file was arround 1 mB...it took some time for me to upload....sheeesh!
Sorry, but this is as far as i can go with this ****...
regards
:confused: :confused:

[Geo]

Hi Geo!
Here is 6000 schematic.
By the way do you have any good coinshooter project to send to
me.With all datas for it;
pcb,coil explanation and all.I would like to make one good
coinshooter for me this winter.But i do not have neither one schematic that suits
me. I do have some uncomplete projects like very interesting Coinhawk,
but i do not have pcb for it. I do not have condiions for smd type pcbs
to make, only conventional....If you have some idea,please send me via
email.

Jasu Geo!
regards
************************************************** **
regards
:confused: :confused:

Hi Ivconic. Thanks for trying to send the file. No problem, this morning i received it from Leto. Now i am ok.
About coinshooter project ?????:confused: .
I "ll look and if i find some complete i will send it to you.
Best wishes

PS These days i will send the shematic of CL3 with litle modifications (better sens at Disc mode. Now Disc and all metal have the same sens)

[ivconic]

Thanks


Many thanks in advance!
Regards!

[jamil_tech]

Hi IVCONIC,

I will be happy if you please send me 6000 project to my email.
My email is [email protected]

Thanks
Jamil

[Carl-NC]

Leto, I got the 6000 schematic but since it's a White's original I can't post it on the forum.

- Carl

[ivconic]

There is on USPTO


There is on uspto.gov.net .....
United States Patent 4,783,630
Need some plugins to download,already explained there...
regards

[Leto]

US4783630

Hi Ivconic,
attached is 4,783,630 patent as you wrote - this is not the same as the one I sent to Carl. Well both are just to complex to start from scratch for me.

[kt315]

folks,

many of you ask me to share out schematics of 5900 DI PRO and 6000 DI PRO I keep of. time to say - it is done. ENJOY!

http://rapidshare.com/files/36731341...s_VLF.zip.html

yours

[mindfree]

Thanks a ton kt315.
Can anyone reupload as it could be downloaded only 10 times?

[perdica 2]

or someone who downloaded can upload the picture here