COIN HAWK PROTEL SCHEMATIC

[Esteban]

In the thread CoinHawk-very interesting !!! (Modifications forum -don't know why is in this place-) start by hawk17966 10-09-2006 is the same info in jpg and pdf, now I'm not sure if Sean has a schematic with variations or corrections.

http://thunting.com/geotech/forums/showthread.php?t=12142&page=2

[amtech2005]

COIN HAWK PROTEL SCHEMATIC

Great Esteban ! And here is mine in a GIF image . We saved Sean a little Work , but Altium software says the schematic has Errors on IC's - I/O "signal" . But we will figure that out, if thats the case. Bye Eugene [email protected]

[Esteban]

Posted several times

Is this the same?:

[Sean_Goddard]

OOPs Sorry guys I DO apologise. It is a Protel99SE file converted to DXP. No way to change back. My bad!!

If Amtech cannot post .GIF file I will try this weekend.

[amtech2005]

COIN HAWK PROTEL SCHEMATIC

It does not open on Protel 99se . It opens on Altrium DXP Software . Looks GREAT but can only be copied to a printer. Im working on Printing -then to a scanner- then to a image convertor , so the file can be uploaded to this forum. I should have a crystal clear copy posted tommorrow , I hope . This software does not save to image , you only can print a copy of whatever the schematic and or project is . When I was checking the protel file data Pulser is the one who posted this originally "AKA" Sean . Thanks Eugene [email protected]

[bugwhiskers]

I renamed the file extension to .s01 which is what my 1990 version of protel expects. Tried to load it in but got "Bad file format".

regards
bugwhiskers

[rumensat]

that is not protel format.
may be somebody make fun with us?
protel file has protel header.

[rumensat]

that is not protel format.
may be somebody make fun with us?
protel file has protel header.

[Geo]

Does anyone know how to extract the file? WinAce Archiver says "Unknown compression Method". The type of file don't seem to be a Protel file.

[Qiaozhi]

File was too big, Now available in ZIP format!!

Hi Sean,

Please can you upload the schematic image for those of us who do not possess a copy of Protel?

[kt315]

greeetings Sean! could anybody be to convert the file in ordinary GIF or what you prefer of?

[Sean_Goddard]

File was too big, Now available in ZIP format!!

[Sean_Goddard]

OK I FOUND it!! Only took me like two weeks of hunting through over 300 CD roms, but I have a copy AT LAST