Tweet
Dear all Gentle men – in this forum
I am looking for help to do some multifunctional PCB BORADS
The aim for this to test what I am going to do . and make design working to nearest level of extreme hunter I can say there is no or enough information about it.
but It seems its working with better performance level than T808 or c-scope
Taking in consideration my technicality to do design for MD less than zero and may be reach to-270C0
, nothing will be new – just change some methods without creating new design out side this forum, I believe it will work special with tow frequency but my target 3frequency so may be I am wrong or total wrong !() .
But once it work and test the performance level any engineer here can modified to work with any type frequency with any current wave shape even can be modified to wok with PI as tow box MD.
Also I don't have pcb- or schematic - so I will start prepare some drawing from this forum with the options that needed to modify .
And you need to excuse me about the suggested drawings .
I see all efforts the attended in this forum in terms of helping the people to let there MD works – accuracy of information and discussions and explanations also gives me a lot of information how Md;s work Also I will be happy with great engineers in this form to join , specially Mr. Carl , (we need to lean more & more)
And I hope this will not breaking any rules in this forum or affecting on any business going on here or if there is any comments about this subject please let me know . so I can start .
Best wishes for all
I am looking for help to do some multifunctional PCB BORADS
The aim for this to test what I am going to do . and make design working to nearest level of extreme hunter I can say there is no or enough information about it.
but It seems its working with better performance level than T808 or c-scope
Taking in consideration my technicality to do design for MD less than zero and may be reach to-270C0
, nothing will be new – just change some methods without creating new design out side this forum, I believe it will work special with tow frequency but my target 3frequency so may be I am wrong or total wrong !() .
But once it work and test the performance level any engineer here can modified to work with any type frequency with any current wave shape even can be modified to wok with PI as tow box MD.
Also I don't have pcb- or schematic - so I will start prepare some drawing from this forum with the options that needed to modify .
And you need to excuse me about the suggested drawings .
I see all efforts the attended in this forum in terms of helping the people to let there MD works – accuracy of information and discussions and explanations also gives me a lot of information how Md;s work Also I will be happy with great engineers in this form to join , specially Mr. Carl , (we need to lean more & more)
And I hope this will not breaking any rules in this forum or affecting on any business going on here or if there is any comments about this subject please let me know . so I can start .
Best wishes for all
Comment