Need assistance with Minelab GPX 5000 control box wiring and internals

[ahmedj81]

Hi everyone,
I am currently working on a Minelab GPX 5000 and I need some technical assistance regarding the internal setup of the control box.
Could anyone please provide high-quality photos of the control box internals? Specifically, I am looking for details on how the wires are connected to the control buttons and switches. A clear view of the wiring diagram or the connection points would be extremely helpful for my repair/maintenance project.
Thanks in advance for your help!
Best regards
AHMED J
[email protected]

[Qiaozhi]

You only need to post your request once, not multiple times.
I have deleted the two other identical topics that you posted.

[kt315]

Ahmad pasha do your part of the Home Work.

[Geotech11]

Can you share the schematic? Let's reverse-engineer this project together and redesign the PCB.

[Geotech11]

hi ahmedj81 Sharing the schematic of such an expensive machine and working together to design and improve it, I think it's a very interesting thing

[ahmedj81]

Can you share the schematic? Let's reverse-engineer this project together and redesign the PCB.

Well, I don't have the diagram. I asked for help connecting the wires.

[ahmedj81]

Ahmad pasha do your part of the Home Work.

Hello, could you please help me organize the wiring from the circuit board to the buttons on the control box of my GPX 5000? I received a picture of the device's wiring diagram, thank you, but it's covered in a white substance and I can't see anything (the wire colors on the circuit board side are covered in the white substance and are unclear). Therefore, I need a clear picture of the wiring connected to the control buttons on the blue box. Thank you for your help.