Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Pulse IB discriminator (by Sasho - Varna)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • smity
    replied
    It is possible to use uA741CN?

    Leave a comment:


  • smity
    replied
    lm566 Has not found. Than it is possible to substitute? What complete name OP2 741? Thanks for answers.

    Leave a comment:


  • mesy64
    replied
    how mach depth detect pulse ib for a coin in ground and large target??

    Leave a comment:


  • WM6
    replied
    Interesting solution. Congratulation to sasho Varna. I am afraid of multiple coil solution and still waiting for one coil solution of this schematic.

    Leave a comment:


  • Aiko
    replied
    Guys ... is there some test reults?

    Leave a comment:


  • Aiko
    replied
    Hi guys!

    If someone has tested that device on the field, would share some test results – depth, discrimination and stability? Is this real pulse induction detector with discrimination, or only the name is IB Pulse?

    … Ivconic, I will be grateful for your opinion also.

    Regards!

    Leave a comment:


  • gwzd
    replied
    Originally posted by dantech View Post
    Da, da.... we know somewhat about it
    It is an English speakers' forum after all. Nothing to get upset about.
    Vi kan alla börja prata på olika språk om du vill, men det skulle aldrig funka, eller hur?

    Translation from Swedish for non Swedish speakers:
    We can all start talking in different languages if you want, but that would never work, or?

    Chill out man, I didn't intend to offend you, just to give others the opportunity to profit from the post.
    Regards

    Leave a comment:


  • gwzd
    replied
    Originally posted by сашо View Post
    Возможно если у полевого транзистора имеется малое напряжения запирания.Нужна другая схема управления затвора
    транзистора u/2=открит и -u закрит.
    For the non Russian speakers:

    "That's possible if the JFET transistor has a low pinch off voltage. You'll need another control circuit, use u/2 = to open and -u to close"

    This is interesting because the word "открит" actually means "open" but assuming this is a n-channel then it should be "closed" or conducting while the word "закрит" means "closed" but it should be open or not conducting. I think you got the point.

    Regards

    Leave a comment:


  • dantech
    replied
    Da, da.... we know somewhat about it

    Leave a comment:


  • gwzd
    replied
    Originally posted by Unregistered View Post
    Сашо, можно ли вместо CD4066 использовать полевой транзистор
    For the non Russian speakers,
    "Sacho, can I use JFET transistor instead of the CD4066?"

    It's useful to know a few languages after all
    Regards

    Leave a comment:


  • сашо
    Guest replied
    Возможно если у полевого транзистора имеется малое напряжения запирания.Нужна другая схема управления затвора
    транзистора u/2=открит и -u закрит.

    Leave a comment:


  • Unregistered
    Guest replied
    Сашо, можно ли вместо CD4066 использовать полевой транзистор

    Leave a comment:


  • karlos x
    replied
    pcb

    in schematick....
    Attached Files

    Leave a comment:


  • karlos x
    replied
    pcb

    p=25 k threshold
    Attached Files

    Leave a comment:


  • karlos x
    replied
    pcb

    Modified for last schematick,audio mod with LM 566...
    Attached Files

    Leave a comment:

Working...
X