DEEPERS

[aft_72005]

Hi Alexismex

Thanks very much for the schematic. I have a question. Q 16 is a reg. volt. of 2.5 V? 2.500 V in schematic.

Regards

Esteban

Hi Esteban
Not regulator IC, It is reference voltage IC.
Best regards.

[Eugene52]

DEEPERS

Alexismex , Thank-you for the beautifull schematic !!! Almost as beautifull as yesterdays photo of Miss India that was deleted . I found a link with depth information just scroll to the bottom of the page !!

Please show pictures of the circuit board !!!..Looks like a great project !!.......Thank-You again Everyone.........Best Regards..........Eugene52

http://www.deepers.com/english/Metal_detector-tests.htm

[Esteban]

Hi Alexismex

Thanks very much for the schematic. I have a question. Q 16 is a reg. volt. of 2.5 V? 2.500 V in schematic.

Regards

Esteban

[Alexismex]

Soon i will post the power supply i must draw from paper to Splan,
I do not have actually a camera...later .
For the performance very good in neutral soil... with 10 inch coil.... air test 85cm .... inside ground 70 cm.for a alu-coca-can ....much much better than pulstar....If you see the schematic ...you will see a small " Deeper-secret" to give the punch for the sensibility ...you must use + 6v and -12v for the Op's.... if you go to a more conservative approach with +5V and -5 V or 6 and 6 you will loose easely 10cm for the alu can and proportional with bigger coil ....
have goods feeling all the forum.

battery configuration for deepers 8

dear friend alexismex thank you for sharing this circuit and what the configuration of the battery for this circuit +6volts and -12volts .

[nelson]

Hi Alexismex and thanks for anwer my question.
Do you have the pcb design to share?
A friend of mine, send me a few pictures of deepers 8. Last evening i had the intention to send them has i promess here, but a last inconvinience didn´t allow me to do that. So Aft this evening i´ll try to send it.
Alexismex, can you lease tell us how is the performance of this detector?
I had heard from my friend here in Chile, that this detector doen´t work has is advertise from the factory. Any comments will be very helpfull.
Take care and i hope we can feedback from your expirencies.
Nelson

PD: my email is [email protected]

Hello Nelson ,
The schematic is 100% functional from original ,is my contribution for 2009....

[aft_72005]

HiAlexismex
For circuit thank you . can you upload some pictures from inside the box ?
Best regards.

HiAlexismex
Waiting……………………
Best regards.

[aft_72005]

Hi afl.
I have the pictures, so when a get home i ll post them.
I also like to know if the schematic is the correct one or have any problems
Regards
Nelson

Hi Nelson
How are you ? Waiting for you pictures .
About circuit ,theory seem is correct . but exactly Alexismex know.
Best regards.

[erolunall]

Hello

Maybe 1836 help for HEX for thiz Schematic.


Best Wishes
Erol

[Alexismex]

Hello Nelson ,
The schematic is 100% functional from original ,is my contribution for 2009....

[ivconic]

Hey KT315, that is indeed hi profile work there on your photos. Very very good. But...so as i noticed, you people from there do make things hi profile and almost perfect reffering design and look. What are the performances?
Since you have such good conditions to do that kind of work, why not you try to do TGSL (with last BD140 mod) in smt, to look like that. I bet it will work so good , you will be suprised.
I am suggesting this cose i really admire such clean work as on your photos...but there is another thing; i had few devices made there and to tell you the truth (dont guess me wrong i am not peaking you) i was not satisfied with performances. Not at all. So you people do have conditions and know how....seems only you dont have good schematics and projects.. So why not trying some proven projects from this forum? What is all about? Ego? C'mon...look at me, i dont have such strong ego...if something foreign is good - i will applause to that and spread the news.
So...just once, just for us here, do make TGSL in smt and try it. Later post your opinion..
Or ok if you dont want TGSL than make Eldorado or Lobo...pick any one.
Our handmades here for sure can not compete those you posted reffering technology and design....but trust me; my ugly,dirty TGSL handmade is real beast comparing to those few devices came from Rusia, i had oportunity to test so far. Extra calm and stabille and extra deep, as well as with perfect discrimination up to 40cm in soil...try and see.
Regards!

[jantnadal]

kt315 hello I've been looking for the diagram of the MF and VLF DEEPERS or PROSPECTOR has been difficult and I hope if any of the forum so I can get would be helpful, because you want to build on their depth and I think it is one of the best apart head of heammer

[kt315]

[kt315]

[kt315]