My Digital Pulse detector Delta Pulse 3

[jap]

Hi Jap

What Demo ? I need not Demo

I need the real Hex hihihihi

ok thx

Hi Nicolas
The real Hex hihihihi??? present at the owner-And possible requested from him.


best time
j.

[Nicolas]

hi Nicolas
I know that is demo hex, and I had finished the project
I have only a problem ( the PIC can not detect the coil )
But I asked if I can use the square coil to detect greatest depth.

Best time

Yes of course you can use
But tell me if your Pic detect first the small coil or no? and pass for the square coil but first test the ohm and Henry values

Best time

[volcano]

Hi Volcano

This is the Demo Hex

Best time
Nicolas

hi Nicolas
I know that is demo hex, and I had finished the project
I have only a problem ( the PIC can not detect the coil )
But I asked if I can use the square coil to detect greatest depth.

Best time

[jap]

Hi Jap
what mean Demo Hex !!!!
I want to use the square coil to detect the greatest depth

thanks

Hi volcano
-You can use the square coil .
-for demo hex read reply#213 .
best time
j.

[Nicolas]

Hi Jap
what mean Demo Hex !!!!
I want to use the square coil to detect the greatest depth

thanks

Hi Volcano

This is the Demo Hex

Best time
Nicolas

[volcano]

Hi Jap
what mean Demo Hex !!!!
I want to use the square coil to detect the greatest depth

thanks

[Nicolas]

Hi Nicolas
-FOR DEMO HEX read reply#116
best time
j.

Hi Jap

What Demo ? I need not Demo

I need the real Hex hihihihi

ok thx

[jap]

Hi Nicolas
-FOR DEMO HEX read reply#116
best time
j.

[Nicolas]

Hi Nicolas
-The HEX WORKED but for test detection only--no menu
-You can not get to the list and setting - it's a test run only
best time
j.

Thanks Jap

If you can put here your Hex file

I'm interested for it

[jap]

Hi Nicolas
-The HEX WORKED but for test detection only--no menu
-You can not get to the list and setting - it's a test run only
best time
j.

[Nicolas]

I ordered the 18F4520 like shown in the schematic and thought that it works, too. After programming there is no output on GLCD (GLCD is tested and ok). Maybe the config is not compatible with this type of PIC so i have to order the 18F452 to check.

Hi
turboaleks


Give me the Hex file for testing

because the old not works

I have checked that jap

Best time

[jap]

Hi turboaleks
-Where he has initial programming it is a sign.
-read reply#199
Because there are important In order to use the keys to on a broad.
try &test
best time
j.

[turboaleks]

I ordered the 18F4520 like shown in the schematic and thought that it works, too. After programming there is no output on GLCD (GLCD is tested and ok). Maybe the config is not compatible with this type of PIC so i have to order the 18F452 to check.

[jap]

Hi volcano
While ( the PIC can not detect the coil ) but coil connected This is normal.
Solution:1-He is very sensitive to things inside the place.
2-Test must coil a small diameter and lifted a sufficient distance to the up highest.
-put photo to glcd while work!!!!
best time
j.

[volcano]

thank you very very much Jap
you helps all members of forum


when I used the keys, the screen is on.
But I have a problem ( the PIC can not detect the coil )


THANKS