garrett power on-off sensitivity switch

[soloman]

Garrett ADS VLF/TR Deepseeker power on-off switch not working and need to find where a replacement switch might be found....Garrett states they dont have the part...any help in locating one would be appreciated.

[Carl-NC]

I think this is part of the sensitivity control, so it's a combo pot+switch. You will need to find out what the whole thing is, should be reasonably easy to source a new one.

[soloman]

garrett sensitivity /power switch

Garrett ADS VLF/TR Deepseeker power on-off switch not working and need to find where a replacement switch might be found....Garrett states they dont have the part...any help in locating one would be appreciated.

Agree with your assessment....have the switch out and the number off of it....but Kellyco;Garrett and Granger say they dont have the switch.....any suggestions on where to locate one.......much appreciated.....soloman

[Carl-NC]

I just got a 2nd request for this problem... if you can send a photo of the switch & a photo of the Garrett box (they made several different versions of the ADS) I'll see what I can do.

[soloman]

sensitivity switch

I just got a 2nd request for this problem... if you can send a photo of the switch & a photo of the Garrett box (they made several different versions of the ADS) I'll see what I can do.

thanks for checking back........located a switch from texas metal detectors........thanks again....waiting for it to be sent to me.......soloman